MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in Industrial Controllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. What exactly is it? Let' s check it out!

Catalog:

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

MAX7219CWG  Overview

MAX7219CWG  Features

MAX7219CWG  Applications

MAX7219CWG  Package

Datasheet PDF

Specifications

Parts with Similar Specs

Frequently Asked Questions

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

Symbol

Footprint

3D-model

MAX7219CWG Overview

The design of the package is similar to that of Tube. It is included in a package with the version 24-SOIC (0.295, 7.50mm Width). This electrical device has an LED display. Surface Mount is used to mount this electronic component on the board. This electrical component performs at temperatures ranging from 0°C to 70°C. Display drivers should be able to function. Drivers for display devices Display drivers require a 4V5.5VV power supply.To terminate transmission lines with a 24 termination, an impedance-matching device is used. The gadget is part of the MAX7219 family. A gadget is made up of only 24 pins. It can be installed on a variety of surfaces due to its 24 pin configuration.Display drivers are attached on the board using the Surface Mount axis, allowing the component to be readily removed. It is powered by a 5V battery.

A supply current is necessary for 330mA to function properly. There are 64 categories, with the "Electronics" segment representing any member of the Seller Group's equipment solutions company. It can also be implemented into Display Drivers. It can operate everywhere in the world thanks to its two 5V power supply. The gadget is considered active when the maximum current required for operation exceeds 330mA. As a result, it produces 4.5 volts of output voltage. It has eight outputs in terms of output arrangement. Additionally, it is distinguished by the letter COMMON-CATHODE.

MAX7219CWG Features

24-SOIC (0.295, 7.50mm Width) package

MAX7219 family

24 pin count

24 pins

5V power supplies

8 output

Applications

This product can be used in Bar-Graph Displays, Industrial Controllers, Panel Meters, LED Matrix Displays

MAX7219CWG Applications

There are a lot of MAX7219CWG display drivers applications.

Car Audios / Radios

Set-Top Boxes

Panel Meters

Remote Displays

Mobile Projector

Industrial Controllers and Instrumentation

Bar Graphs and Matrix Displays

Voltmeter

MAX7219CWG  Package

24-SOIC (0.295, 7.50mm Width)

Datasheet PDF

Please DOWNLOAD datasheets and manufacturer documentation for MAX7219CWG.

Specifications

MAX7219CWG technical specifications, attributes, parameters and parts with similar specifications

Parts with Similar Specs

Frequently Asked Questions

Where should the MAX7219 IC be used?

1. This IC is mostly used to convert serial data to parallel data. 2. The chip is used to minimize the number of /O pins on a controller or CPU. 3. Used to control 64 LEDs using only three PINS. 4. Used when controlling 7-segment displays. The chip is capable of controlling up to 8 DIGIT. 5. Can be utilized to control more display segments by serially connecting more chips.

How to Apply MAX7219 IC ?

The chip functions similarly to a shift register. To begin, we shall send serial data to the chip bit by bit.Once all data has been transmitted, we will instruct the chip to shift this serial data to output by activating the CS pin. The working technique is outlined below in detail. Connect the DIN, CS, and CLK pins first. These three pins are critical for chip control. The next step is to choose a resistor for the ISET pin. As we all know, there is no market standard specification for segment displays. They offer various voltage and current settings. To drive the display correctly, we will use the table below to select the suitable resistor.

What exactly is MAX7219 IC?

Online purchase of MAX7219CWG LED Dot Matrix Display IC - https://www.vessic.com/en/ The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. It interfaces with a microcontroller via a straightforward serial interface. The chip also includes a BCD decoder and 8x8 static RAM. VCC, 5.5V maximum. Or: The MAX7219 is an integrated circuit designed to control an 8x8 LED MATRIX. The integrated circuit (IC) is a serial input common-cathode (Common Negative) display driver that connects microprocessors (or microcontrollers) to 7-segment numeric LED displays with up to 8 digits, bar-graph displays, or 64 individual LEDs.

What is MAX7219/MAX7221 Differences?

The MAX7219 and MAX7221 are identical except for two parameters: the MAX7221 segment drivers are slew-rate limited to reduce electromagnetic interference (EMI), and its serial interface is fully SPI compatible.

What is the general description of MAX7219/MAX7221?

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. For applications requiring 3V operation or segment blinking, refer to the MAX6951 data sheet.

Related Articles

Exploring the L4984D Controller: Datasheet, Pinout

Release time:2023-11-16       Page View：676

Hi, guys!Today let's Exploring the L4984D Controller: Datasheet, Pinout and more details (IC PFC CTRLR CCM 10SSOP )

S9013 NPS Transistor: Datasheet, Equivalent, How to Use

Release time:2023-11-15       Page View：3034

The S9013 transistor is a popular general-purpose NPN bipolar junction transistor (BJT). It is designed to amplify and switch electronic signals, making it an essential component in various electronic circuits such as amplifiers, oscillators, and power control circuits. Manufactured in a small TO-92 package, the S9013 transistor is physically co...

RG6 Vs RG11 Coaxial Cable: Differences And Similarities

Release time:2023-11-15       Page View：1115

Hi, my friends , the wide range of applications of cables may already be known to many, but today's article is to take you through a detailed look at the similarities and differences between the two rg6 and rg11.Introduction:Coaxial cables are widely used for efficient transmission of high-frequency electrical signals in various applications, including te...

AD9361BBCZ Datasheet, Pinout, Circuit Diagram

Release time:2023-11-13       Page View：831

Hey dear friends, let's unveil the AD9361BBCZ: A Hidden Gem in Wireless CommunicationTray AD9361 LTE Surface Mount IC RF TxRx Only 10mm 1.3V 2.5dB 8dBmIntroduction:In the realm of wireless communication, the AD9361BBCZ stands as an unsung hero, often overlooked by the mainstream industry. This article aims to shed light...

PCF8563 vs DS1307:Arduino-Compatible Real-Time Clock (RTC)Module

Release time:2023-11-10       Page View：2010

Hello, my friends! PCF8563 vs DS1307:Arduino-Compatible Real-Time Clock (RTC) ModulesComparisonIntroduction:Real-Time Clock (RTC) modules are essential components for accurate timekeeping in Arduino projects. Two popular choices for RTC modules are the PCF8563 and the DS1307. In this article, we will compare the PCF8563 a...

What are Energizer A23 Batteries: Datasheet,Use and Equivalents

Release time:2023-11-09       Page View：1077

Hi, dear friends. This post is about the explaination of Throttle Position Sensor

What’s the Difference between St-Link V2 and V3?

Release time:2023-11-07       Page View：3729

CatalogWhat is St-Link?How many versions of ST-Link are there?What is St-Link V2?What is St-LinkV3?Selection & Installation How to connect ST Link V2 to STM32 Cube IDE?How to connect ST Link V2 to STM8?

MCP602 vs TL082: What Are the Differences Really

Release time:2023-11-06       Page View：1452

This article aims to explore the distinctions between the MCP602 and TL082 op-amps, highlighting their unique features and applications.

MCP6002 Op-amp: Datasheet, Pinout, Alternative

Release time:2023-11-04       Page View：2524

MCP6022-E/P Operational Amplifier, Dual, 2 Amplifier, 10MHz, 7V/µs, 2.5V to 5.5V, DIP, 8Pins

AD7524LPZ Digital-to-Analog Converter: Datasheet, CAD-Model, Pinout

Release time:2023-11-02       Page View：583

The AD7524LPZ(8 Bit Digital to Analog Converter 1 20-PLCC (9x9)).This is a high-performance, 8-bit digital-to-analog converter (DAC) designed by Analog Devices. With its excellent accuracy, low power consumption, and wide range of applications, the AD7524LPZ has become a popular choice among engineers in various industries. This ar...

16SVPK330M Alunimum Solid Capacitors: Datasheet, CAD-Model

Release time:2023-10-31       Page View：503

16SVPK330MOS-CON Conductive Polymer Alunimum Solid Capacitors:Catalog16SVPK330MDescription16SVPK330MPolarity Marking 16SVPK330MCAD-Model16SVPK330MFeature16SVPK330MApplication16SVPK330MDiagram16SVPK330Mpackage16SVPK330MPDFToday we are going to introduce Panasonic Electronic Components 16...

TLE4279GXUMA2 Voltage Regulator: Datasheet, Pinout, Feature

Release time:2023-10-26       Page View：526

Today we are gong to share you guys this products:TLE4279GXUMA2: A Low Dropout Voltage Regulator for Reliable Power SupplyCatalogTLE4279GMXUMA2 OverviewTLE4279GMXUMA2 FeatureTLE4279GMXUMA2 PinoutTLE4279GMXUMA2 CAD-ModelTLE4279GMXUMA2 ApplicationTLE4279GMXUMA2 AlternativeTLE42...