MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in Industrial Controllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. What exactly is it? Let' s check it out!

Catalog:

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

MAX7219CWG  Overview

MAX7219CWG  Features

MAX7219CWG  Applications

MAX7219CWG  Package

Datasheet PDF

Specifications

Parts with Similar Specs

Frequently Asked Questions

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

Symbol

Footprint

3D-model

MAX7219CWG Overview

The design of the package is similar to that of Tube. It is included in a package with the version 24-SOIC (0.295, 7.50mm Width). This electrical device has an LED display. Surface Mount is used to mount this electronic component on the board. This electrical component performs at temperatures ranging from 0°C to 70°C. Display drivers should be able to function. Drivers for display devices Display drivers require a 4V5.5VV power supply.To terminate transmission lines with a 24 termination, an impedance-matching device is used. The gadget is part of the MAX7219 family. A gadget is made up of only 24 pins. It can be installed on a variety of surfaces due to its 24 pin configuration.Display drivers are attached on the board using the Surface Mount axis, allowing the component to be readily removed. It is powered by a 5V battery.

A supply current is necessary for 330mA to function properly. There are 64 categories, with the "Electronics" segment representing any member of the Seller Group's equipment solutions company. It can also be implemented into Display Drivers. It can operate everywhere in the world thanks to its two 5V power supply. The gadget is considered active when the maximum current required for operation exceeds 330mA. As a result, it produces 4.5 volts of output voltage. It has eight outputs in terms of output arrangement. Additionally, it is distinguished by the letter COMMON-CATHODE.

MAX7219CWG Features

24-SOIC (0.295, 7.50mm Width) package

MAX7219 family

24 pin count

24 pins

5V power supplies

8 output

Applications

This product can be used in Bar-Graph Displays, Industrial Controllers, Panel Meters, LED Matrix Displays

MAX7219CWG Applications

There are a lot of MAX7219CWG display drivers applications.

Car Audios / Radios

Set-Top Boxes

Panel Meters

Remote Displays

Mobile Projector

Industrial Controllers and Instrumentation

Bar Graphs and Matrix Displays

Voltmeter

MAX7219CWG  Package

24-SOIC (0.295, 7.50mm Width)

Datasheet PDF

Please DOWNLOAD datasheets and manufacturer documentation for MAX7219CWG.

Specifications

MAX7219CWG technical specifications, attributes, parameters and parts with similar specifications

Parts with Similar Specs

Frequently Asked Questions

Where should the MAX7219 IC be used?

1. This IC is mostly used to convert serial data to parallel data. 2. The chip is used to minimize the number of /O pins on a controller or CPU. 3. Used to control 64 LEDs using only three PINS. 4. Used when controlling 7-segment displays. The chip is capable of controlling up to 8 DIGIT. 5. Can be utilized to control more display segments by serially connecting more chips.

How to Apply MAX7219 IC ?

The chip functions similarly to a shift register. To begin, we shall send serial data to the chip bit by bit.Once all data has been transmitted, we will instruct the chip to shift this serial data to output by activating the CS pin. The working technique is outlined below in detail. Connect the DIN, CS, and CLK pins first. These three pins are critical for chip control. The next step is to choose a resistor for the ISET pin. As we all know, there is no market standard specification for segment displays. They offer various voltage and current settings. To drive the display correctly, we will use the table below to select the suitable resistor.

What exactly is MAX7219 IC?

Online purchase of MAX7219CWG LED Dot Matrix Display IC - https://www.vessic.com/en/ The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. It interfaces with a microcontroller via a straightforward serial interface. The chip also includes a BCD decoder and 8x8 static RAM. VCC, 5.5V maximum. Or: The MAX7219 is an integrated circuit designed to control an 8x8 LED MATRIX. The integrated circuit (IC) is a serial input common-cathode (Common Negative) display driver that connects microprocessors (or microcontrollers) to 7-segment numeric LED displays with up to 8 digits, bar-graph displays, or 64 individual LEDs.

What is MAX7219/MAX7221 Differences?

The MAX7219 and MAX7221 are identical except for two parameters: the MAX7221 segment drivers are slew-rate limited to reduce electromagnetic interference (EMI), and its serial interface is fully SPI compatible.

What is the general description of MAX7219/MAX7221?

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. For applications requiring 3V operation or segment blinking, refer to the MAX6951 data sheet.

Related Articles

How Does Diode 1N4148 Work: Datasheet, Circuit

Release time:2023-09-19       Page View：849

Standard Diode Rectifier Small Signal =< 200mA (Io), Any Speed 1V @ 10mA -65°C~175°C 5μA @ 75V Cut Tape (CT) DO-204AH, DO-35, Axial Through Hole

L293D & L293DD: Comparison, Datasheet

Release time:2023-09-19       Page View：630

1.2A mA 2mA mA 5.1mm mm 7.1mm mm Motor Drivers 16 5V V 4 20mm mm Hello, my dear friends, the topic of the blogs will be concerning L293D & L293DD, now let’s go thought these micro-controller!

How Motor Driver L298N Works: Datasheet, Circuit

Release time:2023-09-18       Page View：907

Dimensions： 43 x 43 x 26mm, Weight： 26g, Max Power： 25W Today we're bringing you the datasheet pinout, features, datasheet, and application and more detailed information.The L298NN features low saturation voltage and overtemperature protection.

Transceiver NRF52840-DK: Equivalent

Release time:2023-09-16       Page View：937

Transceiver; 802.15.4 (Thread), ANT, Bluetooth® 5 Type.The nRF52840 DK (Development Kit) includes hardware, firmware source code, documentation, hardware schematics, and layout files. The nRF52840 DK is a hardware development platform used to design and develop application firmware on the nRF52840 System on Chip (SoC).

DS18B20+ Digital Thermometer: Unique 1-Wire Interface

Release time:2023-09-15       Page View：395

(Bulk Digital, Local 3V~5.5V Through Hole -55°C~125°C 1-Wire® ±0.5°C (±2°C) 12 b 1 (Unlimited)) Hi,guys. A brief intoduction to DS18B20+ Digital Thermometer: Unique 1-Wire Interface, which can be applied in many areas like thermostatic controls and industrial systems.

MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Release time:2023-09-15       Page View：735

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in IndustrialControllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LEDmatrices, or single LEDs. ...

Unleash Potential of PIC16F877A-I/P: Ultimate Embedded Solution

Release time:2023-09-15       Page View：652

14KB 8K x 14 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16F877A 40 Pin 20MHz 5V 40-DIP (0.600, 15.24mm)

TOP245YN AC-DC Power Converter: Circuit Diagram

Release time:2023-09-15       Page View：628

Today we're bringing you the datasheet pinout, features, datasheet, and more detailed information. The TOP245YN features Design Flexible, EcoSmart, and Integrated Of-line Switcher.

FT234XD-R Interface Bridge: Footprint, Datasheet, Alternatives

Release time:2023-09-15       Page View：680

FT234XD-R, a USB to serial UART interface with optimized packaging for smaller PCB designs (3mm x 3mm 12 pins DFN)! We wiil give you a brif introduction of its Footprint, Datasheet, Alternatives.

AD210AN Isolation Amplifier: Pinout, Applications, Datasheet

Release time:2023-09-13       Page View：609

The AD210AN is a Precision, Wide Bandwidth 3-Port Isolation Amplifier. This article will unlock its pinout, datasheet, parts comparison and more details about AD210AN.

LD1117S33TR Voltage regulator: PDF, Pinout, Alternatives

Release time:2023-09-13       Page View：1019

Fixed Tin LD1117 PMIC 4 TO-261-4, TO-261AA LD1117S33TR--An adjustable and fixed low-drop positive voltage regulator! This article will reveal LD1117S33TR's pinout, datasheet, alternative and other information.

IRFZ44NL Transistors: Datasheet, Replacement

Release time:2023-09-13       Page View：688

Here are the following introduction to the advantages of IRFZ44NL: Advanced processing techniques to achieve,extremely low on-resistance per silicon area. This benefit,combined with the fast switching speed and ruggedized Device design,provides the designer with an extremely efficient and reliable device for use in a wide variety of applications.