MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in Industrial Controllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. What exactly is it? Let' s check it out!

Catalog:

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

MAX7219CWG  Overview

MAX7219CWG  Features

MAX7219CWG  Applications

MAX7219CWG  Package

Datasheet PDF

Specifications

Parts with Similar Specs

Frequently Asked Questions

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

Symbol

Footprint

3D-model

MAX7219CWG Overview

The design of the package is similar to that of Tube. It is included in a package with the version 24-SOIC (0.295, 7.50mm Width). This electrical device has an LED display. Surface Mount is used to mount this electronic component on the board. This electrical component performs at temperatures ranging from 0°C to 70°C. Display drivers should be able to function. Drivers for display devices Display drivers require a 4V5.5VV power supply.To terminate transmission lines with a 24 termination, an impedance-matching device is used. The gadget is part of the MAX7219 family. A gadget is made up of only 24 pins. It can be installed on a variety of surfaces due to its 24 pin configuration.Display drivers are attached on the board using the Surface Mount axis, allowing the component to be readily removed. It is powered by a 5V battery.

A supply current is necessary for 330mA to function properly. There are 64 categories, with the "Electronics" segment representing any member of the Seller Group's equipment solutions company. It can also be implemented into Display Drivers. It can operate everywhere in the world thanks to its two 5V power supply. The gadget is considered active when the maximum current required for operation exceeds 330mA. As a result, it produces 4.5 volts of output voltage. It has eight outputs in terms of output arrangement. Additionally, it is distinguished by the letter COMMON-CATHODE.

MAX7219CWG Features

24-SOIC (0.295, 7.50mm Width) package

MAX7219 family

24 pin count

24 pins

5V power supplies

8 output

Applications

This product can be used in Bar-Graph Displays, Industrial Controllers, Panel Meters, LED Matrix Displays

MAX7219CWG Applications

There are a lot of MAX7219CWG display drivers applications.

Car Audios / Radios

Set-Top Boxes

Panel Meters

Remote Displays

Mobile Projector

Industrial Controllers and Instrumentation

Bar Graphs and Matrix Displays

Voltmeter

MAX7219CWG  Package

24-SOIC (0.295, 7.50mm Width)

Datasheet PDF

Please DOWNLOAD datasheets and manufacturer documentation for MAX7219CWG.

Specifications

MAX7219CWG technical specifications, attributes, parameters and parts with similar specifications

Parts with Similar Specs

Frequently Asked Questions

Where should the MAX7219 IC be used?

1. This IC is mostly used to convert serial data to parallel data. 2. The chip is used to minimize the number of /O pins on a controller or CPU. 3. Used to control 64 LEDs using only three PINS. 4. Used when controlling 7-segment displays. The chip is capable of controlling up to 8 DIGIT. 5. Can be utilized to control more display segments by serially connecting more chips.

How to Apply MAX7219 IC ?

The chip functions similarly to a shift register. To begin, we shall send serial data to the chip bit by bit.Once all data has been transmitted, we will instruct the chip to shift this serial data to output by activating the CS pin. The working technique is outlined below in detail. Connect the DIN, CS, and CLK pins first. These three pins are critical for chip control. The next step is to choose a resistor for the ISET pin. As we all know, there is no market standard specification for segment displays. They offer various voltage and current settings. To drive the display correctly, we will use the table below to select the suitable resistor.

What exactly is MAX7219 IC?

Online purchase of MAX7219CWG LED Dot Matrix Display IC - https://www.vessic.com/en/ The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. It interfaces with a microcontroller via a straightforward serial interface. The chip also includes a BCD decoder and 8x8 static RAM. VCC, 5.5V maximum. Or: The MAX7219 is an integrated circuit designed to control an 8x8 LED MATRIX. The integrated circuit (IC) is a serial input common-cathode (Common Negative) display driver that connects microprocessors (or microcontrollers) to 7-segment numeric LED displays with up to 8 digits, bar-graph displays, or 64 individual LEDs.

What is MAX7219/MAX7221 Differences?

The MAX7219 and MAX7221 are identical except for two parameters: the MAX7221 segment drivers are slew-rate limited to reduce electromagnetic interference (EMI), and its serial interface is fully SPI compatible.

What is the general description of MAX7219/MAX7221?

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. For applications requiring 3V operation or segment blinking, refer to the MAX6951 data sheet.

Related Articles

CR2016 Vs CR2032: Which is More Widely Used

Release time:2023-10-09       Page View：779

In our day-to-day lives, the CR2032 battery tends to be more commonly used than the CR2016 battery. This is because of its higher capacity and versatility, which make it a popular choice for powering a wide range of electronic devices. You can find the CR2032 battery in everyday gadgets like watches, calculators, remote controls, key fobs, medical d...

SN74HC132PWR: Datasheet, Pinout, Application

Release time:2023-10-06       Page View：559

catalogIntroductionSN74HC132PWROverviewSN74HC132PWR PinoutSN74HC132PWR Functional DescriptionSN74HC132PWR DiagramSN74HC132PWR 3D-ModelSN74HC132PWR AlternativeSN74HC132PWRApplicationSN74HC132PWR DatasheetConclusionIntroduction:TheSN74HC132PWRis a quad2-inputNAND gate integrated c...

KSZ8999I 9-port IC: Datasheet, Application

Release time:2023-10-06       Page View：414

KSZ8999I: IC 10/100 INTEG SWITCH 208PQFP

2n2222a vs 2n2222 Transistor: Are they the same?

Release time:2023-09-27       Page View：3628

Catalog IntroductionOverview of 2N2222A Overview of 2n2222How they work2N2222Avs 2N2222 - ComparisonThe 2N2222A is a widely used general-purpose bipolar junction transistor (BJT). It is a NPN transistor, meaning it has three layers of semiconductor material - namely the emitter, base, and collector.The 2N2222A is designed for low to m...

L298D vs L298N: A Comprehensive Comparison of Motor Driver

Release time:2023-09-26       Page View：2903

Introduction:Motor driver modules play a vital role in controlling and powering motors in various applications, ranging from robotics and automation to hobbyist projects. The L298D and L298N are two popular dual H-bridge motor driver modules widely used in the maker community. In this article, we will delve into a comprehensive comparison of the L2...

SS14 vs SS34 vs SS54 Schottky Power Diode: Pinout, Price & PDF

Release time:2023-09-26       Page View：4871

SS14 vs SS34 vs SS54IntroductionWhat is GSM module?Overview of SS14Overview of SS34Overview of SS54SS14 vs SS34 vs SS54 PinoutSS14 vs SS34 vs SS54 PriceSS14 vs SS34 vs SS54 CAD modelSS14 vs SS34 vs SS54 FeatureSS14 vs SS34 vs SS54 ApplicationSS14 vs SS34 vs SS54 PackageDatasheetIntroductionIn...

Cat5e vs. Cat6 RJ45 Cable: Ethernet Cables Comparison

Release time:2023-09-26       Page View：1552

The two most popular Ethernet cables on the market right now are Cat5e and Cat6 RJ45 cables. As revealed by their names, the numbers and letters "5e" and "6" distinguish them from one another.

LRS-350-24 AC DC Converters: Datasheet, Advantages, Video

Release time:2023-09-26       Page View：704

LRS-350 series is a 350W single-output enclosed type power supply with 30mm of low profile design. Adopting the input of 1 15VAC or 230VAC (select by switch), the entire series provides an output voltage line of 3.3V, 4.2V, 5V, 12V, 15V, 24V, 36V and 48V.

TPS5410 Datasheet & Pinout Switching Regulator

Release time:2023-09-25       Page View：951

8 Terminals 5.5V 8-Pin TPS5410 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 500kHz Tape & Reel (TR) 8-SOIC (0.154, 3.90mm Width)

2N2907 vs 2N3906 Transistor: Which is Better？ ​

Release time:2023-09-25       Page View：3419

2N3906: PNP 150°C TJ 1 Elements 3 Terminations SILICON PNP TO-226-3, TO-92-3 (TO-226AA) Bulk Through Hole 2N2907: PNP TO-206AA, TO-18-3 Metal Can Bulk Through Hole

nRF24l01 2.4 GHz Transceiver Module: Datasheet & Pinout

Release time:2023-09-21       Page View：1518

nrf24l01：RF transceiver IC's 20-VFQFN Exposed Pad package RF transceiver IC is used to save board space. The transceiver RF circuit board is designed with 20 pins.RF transceiver operates based on the frequency of 2.4GHz.

74HC595D Shift Register: Disclose Datasheet & Pinout

Release time:2023-09-21       Page View：473

74HC595D 8-Bit Shift Register. An embedded device is contained in package 16-SOIC (0.154, 3.90mm Width).