MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in Industrial Controllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. What exactly is it? Let' s check it out!

Catalog:

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

MAX7219CWG  Overview

MAX7219CWG  Features

MAX7219CWG  Applications

MAX7219CWG  Package

Datasheet PDF

Specifications

Parts with Similar Specs

Frequently Asked Questions

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

Symbol

Footprint

3D-model

MAX7219CWG Overview

The design of the package is similar to that of Tube. It is included in a package with the version 24-SOIC (0.295, 7.50mm Width). This electrical device has an LED display. Surface Mount is used to mount this electronic component on the board. This electrical component performs at temperatures ranging from 0°C to 70°C. Display drivers should be able to function. Drivers for display devices Display drivers require a 4V5.5VV power supply.To terminate transmission lines with a 24 termination, an impedance-matching device is used. The gadget is part of the MAX7219 family. A gadget is made up of only 24 pins. It can be installed on a variety of surfaces due to its 24 pin configuration.Display drivers are attached on the board using the Surface Mount axis, allowing the component to be readily removed. It is powered by a 5V battery.

A supply current is necessary for 330mA to function properly. There are 64 categories, with the "Electronics" segment representing any member of the Seller Group's equipment solutions company. It can also be implemented into Display Drivers. It can operate everywhere in the world thanks to its two 5V power supply. The gadget is considered active when the maximum current required for operation exceeds 330mA. As a result, it produces 4.5 volts of output voltage. It has eight outputs in terms of output arrangement. Additionally, it is distinguished by the letter COMMON-CATHODE.

MAX7219CWG Features

24-SOIC (0.295, 7.50mm Width) package

MAX7219 family

24 pin count

24 pins

5V power supplies

8 output

Applications

This product can be used in Bar-Graph Displays, Industrial Controllers, Panel Meters, LED Matrix Displays

MAX7219CWG Applications

There are a lot of MAX7219CWG display drivers applications.

Car Audios / Radios

Set-Top Boxes

Panel Meters

Remote Displays

Mobile Projector

Industrial Controllers and Instrumentation

Bar Graphs and Matrix Displays

Voltmeter

MAX7219CWG  Package

24-SOIC (0.295, 7.50mm Width)

Datasheet PDF

Please DOWNLOAD datasheets and manufacturer documentation for MAX7219CWG.

Specifications

MAX7219CWG technical specifications, attributes, parameters and parts with similar specifications

Parts with Similar Specs

Frequently Asked Questions

Where should the MAX7219 IC be used?

1. This IC is mostly used to convert serial data to parallel data. 2. The chip is used to minimize the number of /O pins on a controller or CPU. 3. Used to control 64 LEDs using only three PINS. 4. Used when controlling 7-segment displays. The chip is capable of controlling up to 8 DIGIT. 5. Can be utilized to control more display segments by serially connecting more chips.

How to Apply MAX7219 IC ?

The chip functions similarly to a shift register. To begin, we shall send serial data to the chip bit by bit.Once all data has been transmitted, we will instruct the chip to shift this serial data to output by activating the CS pin. The working technique is outlined below in detail. Connect the DIN, CS, and CLK pins first. These three pins are critical for chip control. The next step is to choose a resistor for the ISET pin. As we all know, there is no market standard specification for segment displays. They offer various voltage and current settings. To drive the display correctly, we will use the table below to select the suitable resistor.

What exactly is MAX7219 IC?

Online purchase of MAX7219CWG LED Dot Matrix Display IC - https://www.vessic.com/en/ The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. It interfaces with a microcontroller via a straightforward serial interface. The chip also includes a BCD decoder and 8x8 static RAM. VCC, 5.5V maximum. Or: The MAX7219 is an integrated circuit designed to control an 8x8 LED MATRIX. The integrated circuit (IC) is a serial input common-cathode (Common Negative) display driver that connects microprocessors (or microcontrollers) to 7-segment numeric LED displays with up to 8 digits, bar-graph displays, or 64 individual LEDs.

What is MAX7219/MAX7221 Differences?

The MAX7219 and MAX7221 are identical except for two parameters: the MAX7221 segment drivers are slew-rate limited to reduce electromagnetic interference (EMI), and its serial interface is fully SPI compatible.

What is the general description of MAX7219/MAX7221?

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. For applications requiring 3V operation or segment blinking, refer to the MAX6951 data sheet.

Related Articles

MPC8270CVVUPEA Microprocessor Datasheet, Pinout, Equivalents

Release time:2023-12-07       Page View：291

1.27mm PowerPC G2_LE 1.53.3V 32-bit Microprocessor MPC82xx Series MPC8270 1.5V 480-LBGA Exposed PadMPC8270CVVUPEAOverviewThe MPC8270CVVUPEA is a specific model ofmicroprocessor in the PowerQUICC II Pro family, manufactured by NXP Semiconductors. It is a highly integrated processor that combines a Pow...

IRF640NPBF Specification, Model, Datasheet

Release time:2023-12-06       Page View：201

This post provide detailed information about IRF640NPBF Specification, Model, Datasheet

S1M Diode: Datasheet, Pinout, Alternatives

Release time:2023-12-05       Page View：2031

Diode 1000 V 1A Surface Mount DO-214AC (SMA)S1MDiodeS1MOverviewDescriptionIn the world of commodity rectifiers, onsemi S1 family of 1 A, P−I−N, SMA rectifiers stand out for their optimized low leakage, low capacitance, and fast response time. This was achieved while maintaining the industry standard VF max of 1.1 V at 1 A a...

XCF04SVOG20C Datasheet, Pinout, Application

Release time:2023-12-04       Page View：305

XCF04SVOG20C DescriptionThe Platform Flash series of in-systemprogrammable configuration PROMs. Available in1 to 32 Mb densities, these PROMs provide an easy-to-use,cost-effective, and reprogrammable method for storing largeXilinx FPGA configuration bitstreams. The Platform FlashPROM series includes both the 3.3V XCFxxS...

TPS5430DDAR PWM Converter Datasheet, Applications, Pinout

Release time:2023-12-01       Page View：263

Switching Voltage Regulators 5.5 to 36V Input 3A Step Dwn ConverterTPS5430DDAROverview The TPS543x has a standard input start-up voltage of 5.3V. The ENA pin can be used to turn off the TPS543x, lowering the supply current to 18 A. When the ENA pin is floating, an internal pullup current source allows operation. The TPS5...

AG10 vs A23 Batteries: Understanding the Difference

Release time:2023-11-28       Page View：730

Batteries are an essential part of our daily lives, powering a wide range of devices from remote controls to keyless entry systems. When it comes to small, button-cell batteries, the AG10 and A23 are two common types that are often used interchangeably. However, there are important differences between these two battery types that are worth understandin...

SIP-KITNXH001 vs. SIP-KITNXH002 DK: A Comparative Analysis

Release time:2023-11-27       Page View：847

Introduction:In the fast-paced world of technology, companies are constantly striving to innovate and develop newer, more advanced products. This holds particularly true for the field of telecommunications, where a multitude of components come together to enable seamless and reliable communication. In this article, we will compare two prominent products ...

BF998 Datasheet, Replacement, Applications

Release time:2023-11-24       Page View：1745

Trans RF MOSFET N-CH 12V 0.03A 4-Pin(3+Tab) SOT-143B

LR44 Battery vs 357 vs SR44: Equivalent, Specifications

Release time:2023-11-23       Page View：2382

LR44, 357, and SR44 are popular choices. These batteries are compact, widely available, and serve as power sources for a range of electronics. In this article, we will compare LR44, 357, and SR44 batteries in terms of their equivalency and specifications.

74HC244D vs 74HC244D,653 vs MM74HC244WM vs SN74LV244A Line Driver

Release time:2023-11-20       Page View：224

In this article, we will compare four popular ICs: 74HC244D, 74HC244D,653, MM74HC244WM, and SN74LV244A. We will delve into their descriptions, CAD models, features, applications, alternatives, dimensions, datasheet PDFs, specifications, and conduct a comprehensive product comparison.s

SN74HC74N Dual D-type Flip-Flop: Datasheet, Pinout, Applications

Release time:2023-11-17       Page View：956

2V~6V 60MHz D-Type Flip Flop DUAL 74HC74 14 Pins 74HC Series 14-DIP (0.300, 7.62mm)The Texas Instruments SN74HC74N is a dual D-type positive-edge-triggered flip-flop with clear and preset. This article will introduce its pinout, applications and datasheet.

AXG210144 Connector: Datasheet,CAD-Model,Dimension

Release time:2023-11-17       Page View：536

CatalogAXG210144DescriptionAXG210144CAD ModelAXG210144FeaturesAXG210144ApplicationsAXG210144AlternativesAXG210144DimensionAXG210144Datasheet PDFSpecificationsProduct comparisonFeatureFEATURES1.Width 1.7 mm slim and low profile two-piece type connectorMated height 0.6 mm/0.8mmSmaller compared to A35US• Wid...