MAX7219CWG Display Driver Ultimate Guide: Datasheet Released

Hello everyone, this article will take the mystery out of MAX7219CWG! A display driver known as the MAX7219CWG is frequently utilized in Industrial Controllers, LED Matrix Displays and so on. The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. What exactly is it? Let' s check it out!

Catalog:

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

MAX7219CWG  Overview

MAX7219CWG  Features

MAX7219CWG  Applications

MAX7219CWG  Package

Datasheet PDF

Specifications

Parts with Similar Specs

Frequently Asked Questions

MAX7219CWG  Pinout

MAX7219CWG  CAD Model

Symbol

Footprint

3D-model

MAX7219CWG Overview

The design of the package is similar to that of Tube. It is included in a package with the version 24-SOIC (0.295, 7.50mm Width). This electrical device has an LED display. Surface Mount is used to mount this electronic component on the board. This electrical component performs at temperatures ranging from 0°C to 70°C. Display drivers should be able to function. Drivers for display devices Display drivers require a 4V5.5VV power supply.To terminate transmission lines with a 24 termination, an impedance-matching device is used. The gadget is part of the MAX7219 family. A gadget is made up of only 24 pins. It can be installed on a variety of surfaces due to its 24 pin configuration.Display drivers are attached on the board using the Surface Mount axis, allowing the component to be readily removed. It is powered by a 5V battery.

A supply current is necessary for 330mA to function properly. There are 64 categories, with the "Electronics" segment representing any member of the Seller Group's equipment solutions company. It can also be implemented into Display Drivers. It can operate everywhere in the world thanks to its two 5V power supply. The gadget is considered active when the maximum current required for operation exceeds 330mA. As a result, it produces 4.5 volts of output voltage. It has eight outputs in terms of output arrangement. Additionally, it is distinguished by the letter COMMON-CATHODE.

MAX7219CWG Features

24-SOIC (0.295, 7.50mm Width) package

MAX7219 family

24 pin count

24 pins

5V power supplies

8 output

Applications

This product can be used in Bar-Graph Displays, Industrial Controllers, Panel Meters, LED Matrix Displays

MAX7219CWG Applications

There are a lot of MAX7219CWG display drivers applications.

Car Audios / Radios

Set-Top Boxes

Panel Meters

Remote Displays

Mobile Projector

Industrial Controllers and Instrumentation

Bar Graphs and Matrix Displays

Voltmeter

MAX7219CWG  Package

24-SOIC (0.295, 7.50mm Width)

Datasheet PDF

Please DOWNLOAD datasheets and manufacturer documentation for MAX7219CWG.

Specifications

MAX7219CWG technical specifications, attributes, parameters and parts with similar specifications

Parts with Similar Specs

Frequently Asked Questions

Where should the MAX7219 IC be used?

1. This IC is mostly used to convert serial data to parallel data. 2. The chip is used to minimize the number of /O pins on a controller or CPU. 3. Used to control 64 LEDs using only three PINS. 4. Used when controlling 7-segment displays. The chip is capable of controlling up to 8 DIGIT. 5. Can be utilized to control more display segments by serially connecting more chips.

How to Apply MAX7219 IC ?

The chip functions similarly to a shift register. To begin, we shall send serial data to the chip bit by bit.Once all data has been transmitted, we will instruct the chip to shift this serial data to output by activating the CS pin. The working technique is outlined below in detail. Connect the DIN, CS, and CLK pins first. These three pins are critical for chip control. The next step is to choose a resistor for the ISET pin. As we all know, there is no market standard specification for segment displays. They offer various voltage and current settings. To drive the display correctly, we will use the table below to select the suitable resistor.

What exactly is MAX7219 IC?

Online purchase of MAX7219CWG LED Dot Matrix Display IC - https://www.vessic.com/en/ The MAX7219 is a constant current LED display driver IC that can power 7-segment LED displays, 64x64 LED matrices, or single LEDs. It interfaces with a microcontroller via a straightforward serial interface. The chip also includes a BCD decoder and 8x8 static RAM. VCC, 5.5V maximum. Or: The MAX7219 is an integrated circuit designed to control an 8x8 LED MATRIX. The integrated circuit (IC) is a serial input common-cathode (Common Negative) display driver that connects microprocessors (or microcontrollers) to 7-segment numeric LED displays with up to 8 digits, bar-graph displays, or 64 individual LEDs.

What is MAX7219/MAX7221 Differences?

The MAX7219 and MAX7221 are identical except for two parameters: the MAX7221 segment drivers are slew-rate limited to reduce electromagnetic interference (EMI), and its serial interface is fully SPI compatible.

What is the general description of MAX7219/MAX7221?

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI. A convenient 4-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219/MAX7221 also allow the user to select code-B decoding or no-decode for each digit. The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. For applications requiring 3V operation or segment blinking, refer to the MAX6951 data sheet.

Related Articles

2N5551 vs BC547 BJTs Comparison

Release time:2024-05-05       Page View：2149

The 2N5551 and BC547 are both NPN bipolar junction transistors (BJTs) commonly used in various electronic circuits. While they share some similarities, there are also key differences between them, making them suitable for different applications. This article provides a comprehensive comparison of these two transistors, focusing on their specifica...

LM3914 vs LM3915 vs LM3916 vs LM3917 How They Work?

Release time:2024-05-04       Page View：1695

This post is about LM3914 vs LM3915 vs LM3916 vs LM3917 detailed comparison.

Top 12 electronic component distributors 2024

Release time:2024-04-25       Page View：6216

Explore the leading electronic component distributors of 2023. From Arrow Electronics to WPG Holdings, discover how top distributors are shaping the global market.

TPS5450DDAR Datasheet, Pinout, Specification

Release time:2024-04-22       Page View：551

Understanding the : A Comprehensive GuideThe TPS5450DDAR is a highly integrated, step-down converter with an integrated MOSFET, designed to deliver up to 3A of continuous output current.

C945 Transistor Datasheet:C1815 VS C945 Comparison

Release time:2024-04-18       Page View：3138

C945 Transistor Datasheet: Features, Applications, and Comparison with C1815. Learn about the C945's pinout, circuits,operation, and how to use it. C945 VS C1815

Lithium Battery Charger TP4056: Datasheet, Schematic, Price

Release time:2024-04-15       Page View：12753

TP4056 charging module: Single-cell Li-ion charger. Find TP4056 datasheet & TP4056 pinout & TP4056 power path circuit here

TDA7265 Audio Amplifier:How To Connect And Test?

Release time:2024-04-02       Page View：3065

TDA7265 DatasheetTDA7265 PinoutTDA7265 Circuit DiagramTDA7265 EquivalentTDA7265 ICPriceTDA7265 FeaturesTDA7265 PackageTDA7265 ApplicationsTDA7265 Applications CircuitHow to Connect and TestTDA7265 Audio Amplifier?TDA7265 VS TDA7269VS TDA2050VS TDA7294What isTDA7265?The TDA7265 is a pop...

1n4007 vs 1n5399 Rectifier Diode: Pinout, Datasheet, Specifications

Release time:2024-03-30       Page View：5127

**1N4007 vs 1N5399 Rectifier Diode: Pinout, Datasheet, Specifications****Introduction**Rectifier diodes are essential components in electronic circuits, responsible for converting alternating current (AC) to direct current (DC). Among the commonly used rectifier diodes are the 1N4007 and 1N5399.

SN74HC595N vs SN74HC574N Shift Register Datasheet,Specs

Release time:2024-03-20       Page View：728

Dear friends，this post will help you make a better choice betweenSN74HC595N vs SN74HC574N for you, and revealShift Register Datasheet,Specs.SN74HC595N:Shift Register 2/6V -40°C~85°C Shift Register 74HC Series 74HC595 16 Pin 5V 16-DIP (0.300, 7.62mm)SN74HC574N:2V~6V 36MHz 8 Bit D-Type Flip Flop DUAL 74...

H6 vs H7 vs H8 vs H9 Battery Difference and Choosing Guide

Release time:2024-03-14       Page View：11149

This post is about H6 vs H7 vs H8 vs H9 Battery Difference and Choosing Guide: Understanding the Variances and Making Informed Decisions

ADRV9009BBCZ RF Description, Datasheet, Specification

Release time:2024-03-14       Page View：360

This post will help you go through the infomation about ADRV9009BBCZ,including Datasheet,Pinout, block diagram, Specification ,etc.ADRV9009BBCZOverviewADRV9009BBCZGeneral DescriptionTheADRV9009is a highly integrated, radio frequency (RF), agiletransceiver offering dual transmitters and receivers, integratedsynthesizers, ...

A3141, A3142, A3143, and A3144 Hall Effect Sensor Differences

Release time:2024-03-11       Page View：1589

Introduction:Hall effect sensors are widely used for various sensing applications, ranging from position sensing to current measurement. The A3141, A3142, A3143, and A3144 are popular Hall effect sensor models manufactured by Allegro Microsystems. While they may appear similar at first glance, each sensor in this series offers unique features and ...