SN74LVC2G80DCTR
Or copy the link below:
- Mfr.Part #
- SN74LVC2G80DCTR
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC FF D-TYPE DUAL 1BIT SM8
- Stock
- 4,009
- In Stock ：
- 4,009
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Flip Flops
- Current - Quiescent (Iq) :
- 5 µA
- Voltage - Supply :
- 1.65V ~ 5.5V
- Number of Bits per Element :
- 1
- Trigger Type :
- Positive Edge
- Operating Temperature :
- -40°C ~ 125°C (TA)
- Output Type :
- Inverted
- Type :
- D-Type
- Product Status :
- Active
- Max Propagation Delay @ V, Max CL :
- 4.5ns @ 5V, 50pF
- Supplier Device Package :
- SM8
- Clock Frequency :
- 160 MHz
- Number of Elements :
- 2
- Mounting Type :
- Surface Mount
- Function :
- Standard
- Input Capacitance :
- 3.5 pF
- Current - Output High, Low :
- 32mA, 32mA
- Datasheets
- SN74LVC2G80DCTR
1.65V~5.5V 160MHz D-Type Flip Flop DUAL 74LVC2G80 8 Pins 5μA 74LVC Series 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
SN74LVC2G80DCTR Overview
The flip flop is packaged in a case of 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A voltage of 1.65V~5.5Vis required for its operation. Temperature is set to -40°C~125°C TA. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. Its output frequency should not exceed 160MHz Hz. As a result, it consumes 5μA quiescent current. Terminations are 8. Members of the 74LVC2G80family make up this object. The power source is powered by 1.8V. A JK flip flop with a 3.5pFfarad input capacitance is used here. Electronic devices of this type belong to the LVC/LCX/Zfamily. Electronic part Surface Mountis mounted in the way. With its 8pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. Vsup reaches 5.5V, the maximal supply voltage. Its flexibility is enhanced by 2 circuits. Due to its reliability, this T flip flop is well suited for TR. The D latch runs on a voltage of 3.3V volts. To operate, the chip has a total of 1 output lines.
SN74LVC2G80DCTR Features
Tape & Reel (TR) package
74LVC series
8 pins
3.3V power supplies
SN74LVC2G80DCTR Applications
There are a lot of Texas Instruments
SN74LVC2G80DCTR Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
