BD6517F-E2
Or copy the link below:
- Mfr.Part #
- BD6517F-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC PWR SWITCH N-CHANNEL 1:2 8SOP
- Stock
- 70
- In Stock ：
- 70
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Current - Output (Max) :
- 500mA
- Rds On (Typ) :
- 110mOhm
- Number of Outputs :
- 2
- Operating Temperature :
- -25°C ~ 85°C (TA)
- Features :
- Status Flag
- Fault Protection :
- Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
- Input Type :
- Non-Inverting
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Switch Type :
- USB Switch
- Output Configuration :
- High Side
- Mounting Type :
- Surface Mount
- Product Status :
- Obsolete
- Voltage - Load :
- 3V ~ 5.5V
- Supplier Device Package :
- 8-SOP
- Output Type :
- N-Channel
- Ratio - Input:Output :
- 1:2
- Interface :
- On/Off
- Datasheets
- BD6517F-E2
5V N-Channel PMIC BD651* 8 Pin 5V 8-SOIC (0.173, 4.40mm Width)
BD6517F-E2 Overview
The LED driver's packaged as a Tape & Reel (TR).The 8-SOIC (0.173, 4.40mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is USB Switch.To ensure reliable operation, the temperature should be set to -25°C~85°C TA.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.This object belongs to the BD651* family.It contains 8 terminations.For operation, 8 pins are used.The LED driver has 2 functions.The maximum output current drops to 500mA in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.There is 110mOhm resistance on the LED driver.It is set to 500mA in this case.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.This part has a power supply of 5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 2.7V volts.This LED driver can also produce CONTROL LOGIC: ACTIVE LOW.
BD6517F-E2 Features
Supplied from 5V
Resistance of 110mOhm
Additional features like CONTROL LOGIC: ACTIVE LOW
BD6517F-E2 Applications
There are a lot of ROHM Semiconductor
BD6517F-E2 Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
