BD6510F-E2
Or copy the link below:
- Mfr.Part #
- BD6510F-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC PWR SWITCH N-CHANNEL 1:1 8SOP
- Stock
- 46,589
- In Stock ：
- 46,589
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Number of Outputs :
- 2
- Current - Output (Max) :
- 1A
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 8-SOP
- Features :
- Status Flag
- Fault Protection :
- Current Limiting (Fixed), Over Temperature, UVLO
- Ratio - Input:Output :
- 1:1
- Voltage - Load :
- 3V ~ 5.5V
- Output Type :
- N-Channel
- Switch Type :
- General Purpose
- Rds On (Typ) :
- 100mOhm
- Output Configuration :
- High Side
- Operating Temperature :
- -25°C ~ 85°C (TA)
- Product Status :
- Active
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Interface :
- On/Off
- Input Type :
- Non-Inverting
- Datasheets
- BD6510F-E2
5V N-Channel PMIC BD651* 8 Pin 5V 8-SOIC (0.173, 4.40mm Width)
BD6510F-E2 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.173, 4.40mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -25°C~85°C TA.The LED driver is equipped with 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.It comes under the family of BD651*.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.Currently, the LED driving board has 100mOhm resistance.As a result, the output current is set to 500mA.This part has a power supply of 5V volts.
BD6510F-E2 Features
Supplied from 5V
Resistance of 100mOhm
BD6510F-E2 Applications
There are a lot of ROHM Semiconductor
BD6510F-E2 Power Switches ICs applications.
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
