BD6513F-E2
Or copy the link below:
- Mfr.Part #
- BD6513F-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- -
- Datasheet
- Download
- Description
- IC SWITCH HIGH SIDE 2CH SOP-8
- Stock
- 2,330
- In Stock ：
- 2,330
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Voltage - Supply (Vcc/Vdd) :
- -
- Output Type :
- -
- Fault Protection :
- -
- Mounting Type :
- -
- Rds On (Typ) :
- -
- Number of Outputs :
- -
- Switch Type :
- -
- Input Type :
- -
- Features :
- -
- Supplier Device Package :
- -
- Interface :
- -
- Voltage - Load :
- -
- Output Configuration :
- -
- Operating Temperature :
- -
- Current - Output (Max) :
- -
- Product Status :
- Active
- Package / Case :
- -
- Ratio - Input:Output :
- -
- Datasheets
- BD6513F-E2
5V PMIC 8 Pin 5V SOP
BD6513F-E2 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the SOP package as well.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 2 functions.To comply with the operation criteria, the maximum output current is reduced to 600mA.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.In this case, there is 100mOhm resistance in the LED driving board.This results in a 500mA output current.In order to operate normally, the supply voltage (Vsup) must remain above 3V.A total of 2 channels are available for you to choose from.It has a power supply of 5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -25°C degrees Celsius in order to remain reliable.In addition, CONTROL LOGIC: ACTIVE LOW can be produced using this LED driving board.Currently, the interface type of the lighting driver is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
BD6513F-E2 Features
Supplied from 5V
Resistance of 100mOhm
2 channels
Additional features like CONTROL LOGIC: ACTIVE LOW
BD6513F-E2 Applications
There are a lot of ROHM Semiconductor
BD6513F-E2 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
