UC2825N
Or copy the link below:
- Mfr.Part #
- UC2825N
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 16DIP
- Stock
- 427
- In Stock ：
- 427
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Topology :
- Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
- Synchronous Rectifier :
- No
- Output Configuration :
- Positive
- Clock Sync :
- No
- Mounting Type :
- Through Hole
- Voltage - Supply (Vcc/Vdd) :
- 8.4V ~ 30V
- Output Type :
- Transistor Driver
- Function :
- Step-Up, Step-Up/Step-Down
- Supplier Device Package :
- 16-PDIP
- Frequency - Switching :
- 340kHz ~ 460kHz
- Control Features :
- Current Limit, Enable, Frequency Control, Ramp, Soft Start
- Output Phases :
- 1
- Duty Cycle (Max) :
- 80%
- Serial Interfaces :
- -
- Number of Outputs :
- 2
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Product Status :
- Active
- Datasheets
- UC2825N
16 Terminals 8.4V~30V 16-Pin UC2825 DC to DC converter IC SWITCHING CONTROLLER 2 Outputs 340kHz~460kHz Transistor Driver
UC2825N Overview
It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.4V~30V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 340kHz~460kHz. dc dc regulators can be carried out with Through Hole. Current Limit, Enable, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. UC2825 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. This dc dc voltage regulator should be powered by a voltage of 8.8V. Statistically, DC regulator outputs 13V volts. This dc to dc regulator accepts only 30V input voltage at most. In most cases, the output current of the dc dc regulator will be 1.5A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. 1MHz is the frequency of the switching controller. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN CURRENT MODE. There must be a voltage supply of 15V volts. A controller's current should not exceed 33mA. An input flow rate of 22mA could satisfy the switching converter 's operation requirements.
UC2825N Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2825N Applications
There are a lot of Texas Instruments
UC2825N DC to DC converter applications.
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
