UC2823AN
Or copy the link below:
- Mfr.Part #
- UC2823AN
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 16DIP
- Stock
- 100
- In Stock ：
- 100
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Function :
- Step-Up, Step-Up/Step-Down
- Number of Outputs :
- 1
- Supplier Device Package :
- 16-PDIP
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Duty Cycle (Max) :
- 100%
- Output Type :
- Transistor Driver
- Output Phases :
- 1
- Product Status :
- Active
- Control Features :
- Current Limit, Frequency Control, Ramp, Soft Start
- Voltage - Supply (Vcc/Vdd) :
- 8.4V ~ 22V
- Topology :
- Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
- Synchronous Rectifier :
- No
- Serial Interfaces :
- -
- Output Configuration :
- Positive
- Frequency - Switching :
- 400kHz ~ 1MHz
- Clock Sync :
- No
- Mounting Type :
- Through Hole
- Datasheets
- UC2823AN
16 Terminals 8.4V~22V 16-Pin UC2823 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 400kHz~1MHz Transistor Driver
UC2823AN Overview
With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.4V~22V and has a 8.4V~22V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 400kHz~1MHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "UC2823" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Input voltage of dc dc voltage regulator should be 8.8V. Based on the test statistics, DC regulator outputs voltage 2V. It should be noted that the dc to dc regulator only accepts 20V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controllers work at 1MHz Hz. This value is CAN ALSO BE CONFIGURED IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose. There is a requirement for a 12V supply voltage. It is not recommended to supply more current to the controller than 36mA.
UC2823AN Features
Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2823AN Applications
There are a lot of Texas Instruments
UC2823AN DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
