UC28023DW
Or copy the link below:
- Mfr.Part #
- UC28023DW
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOP 16SOIC
- Stock
- 22,382
- In Stock ：
- 22,382
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Serial Interfaces :
- -
- Number of Outputs :
- 1
- Duty Cycle (Max) :
- 90%
- Topology :
- Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
- Mounting Type :
- Surface Mount
- Output Phases :
- 1
- Supplier Device Package :
- 16-SOIC
- Voltage - Supply (Vcc/Vdd) :
- 9V ~ 30V
- Product Status :
- Active
- Clock Sync :
- No
- Synchronous Rectifier :
- Yes
- Control Features :
- Current Limit, Enable, Frequency Control, Ramp, Soft Start
- Frequency - Switching :
- 340kHz ~ 460kHz
- Output Type :
- Transistor Driver
- Operating Temperature :
- -40°C ~ 105°C (TA)
- Output Configuration :
- Positive
- Function :
- Step-Up, Step-Up/Step-Down
- Datasheets
- UC28023DW
16 Terminals 9V~30V 16-Pin UC28023 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 340kHz~460kHz Transistor Driver
UC28023DW Overview
With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 9V~30V and has a 9V~30V supply voltage. Worked in a -40°C~105°C TA dc switcher before. In this switching controller, the switch can be set to 340kHz~460kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "UC28023" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 13V. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controllers work at 1MHz Hz. This value is CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE so that DC to DC voltage regulator better serves the purpose. DC switching uses 1.1mA when it is dormant. A nominal working status is achieved when the input voltage is set to 30V. In order to ensure the dc switcher's functionality, users must limit the voltage to 30V due to the dc switcher's maximum input voltage. DC switchers cannot produce output currents greater than 1.5A. Datasheets state the switching converter can output up to 13.5V volts. The number of channels available for high-quality communication is 2. For operation, the switching converter could be satisfied with 25mA current flow input.
UC28023DW Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE
UC28023DW Applications
There are a lot of Texas Instruments
UC28023DW DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
