TL494BDR2

TL494BDR2G Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 7V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 200kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "TL494" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. Input voltage of dc dc voltage regulator must be 7V. Voltages 40V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 48 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 40kHz Hz. A circuit should contain 15V in order to ensure the voltage regulator dc to dc runs safely and reliably. There are several dc to dc voltage regulator in the SWITCHMODE™ series. There is a possibility that a current higher than 15mA will cause improper operation of the component and possibly damage switching voltage regulators.

TL494BDR2G Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 40kHz

TL494BDR2G Applications

There are a lot of ON Semiconductor
TL494BDR2G DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery