VN460SP-E

Share

Or copy the link below:

Mfr.Part #
VN460SP-E
Manufacturer
STMicroelectronics
Package / Case
PowerSO-10 Exposed Bottom Pad
Datasheet
Download
Description
IC PWR DRIVER N-CHAN 1:1 PWRSO10
Stock
39,460
In Stock :
39,460

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
STMicroelectronics
Product Category :
Power Distribution Switches, Load Drivers
Interface :
On/Off
Current - Output (Max) :
25A
Voltage - Load :
5.5V ~ 36V
Fault Protection :
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Operating Temperature :
-40°C ~ 150°C (TJ)
Number of Outputs :
1
Supplier Device Package :
10-PowerSO
Mounting Type :
Surface Mount
Output Configuration :
High Side
Rds On (Typ) :
20mOhm (Max)
Features :
Status Flag
Voltage - Supply (Vcc/Vdd) :
Not Required
Switch Type :
Relay, Solenoid Driver
Input Type :
Non-Inverting
Product Status :
Obsolete
Output Type :
N-Channel
Package / Case :
PowerSO-10 Exposed Bottom Pad
Ratio - Input:Output :
1:1
Datasheets
VN460SP-E
VESS Electronics offers Power Distribution Switches, Load Drivers STMicroelectronics VN460SP-E, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Operating Temperature:-40°C ~ 150°C (TJ), Mounting Type:Surface Mount, Package / Case:PowerSO-10 Exposed Bottom Pad, VN460SP-E pinout, VN460SP-E datasheet PDF, VN460SP-E amp .Beyond Power Distribution Switches, Load Drivers STMicroelectronics VN460SP-E ,we also present a selection of AP22966DC8-7, AP22800HB-7, AP22653W6-7, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

N-Channel PMIC VN460 10 Pin PowerSO-10 Exposed Bottom Pad

VN460SP-E Overview


The package is in the form of a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.Relay, Solenoid Driver is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It is part of the VN460 family of LED drivers.It contains 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.This results in the maximum output current dropping to 25A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 20mOhm resistance are used.This case results in a 25A output current.When using this LED driving board, it is recommended that the supply voltage is set to 36V.There is a maximum input voltage of 36V volts.The input voltage minimum is 5.5V volts.There is a maximum current requirement of 15μA for its operation.

VN460SP-E Features


Resistance of 20mOhm


VN460SP-E Applications


There are a lot of STMicroelectronics
VN460SP-E Power Switches ICs applications.


  • Telecom and Network Systems
  • PC Card Hot Swap
  • Storage Drives
  • Portable/Handheld Devices
  • Wireless/Networking Cards
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Solid-State Drives
  • Hot Swap
  • HDD and SSD
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • Diodes Incorporated
    IC PWR DRIVER BIPOLAR 1:1 SOT23
  • Diodes Incorporated
    IC PWR SWITCH P-CHAN 1:1 SOT25
  • onsemi
    IC PWR DRIVER N-CHANNEL 1:1 SC74
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
  • Toshiba Electronic Devices and Storage Corporation
    IC PWR SWITCH P-CHAN 1:1 4WCSPD
RFQ