TC4422EPA

TC4422EPA Overview

For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A package of Tube has been used.This configuration includes 1 drivers.The device is mounted in the direction of Through Hole.A supply voltage of 4.5V~18V demonstrates its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number TC4422.The device is mounted using Through Hole.The pins are configured with 8 when designing the chip.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.9A is the maximum output current.There are 8 component pins on the board.Based on its basis, it integrates 1 outputs.An output current of 9A is supported.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended to keep the supply current at 1.5mA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers outputs 18V as voltage.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.The gate driver belongs to the - series.The supply voltage is 1.5 mA.Mosfet driver ic is recommended to keep the maximum output voltage at 25mV.

TC4422EPA Features

Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Operating with the supply voltage of -

TC4422EPA Applications

There are a lot of Microchip Technology
TC4422EPA gate drivers applications.

• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems