STM32F107VCT6

STM32F107VCT6 Description

The STM32F107VCT6 from the STM32F103xC, STM32F103xD, and STM32F103xE performance line family includes a high-performance ARM Cortex -M3 32-bit RISC core operating at 72 MHz, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and a wide range of enhanced I/Os and peripherals connected to two APB buses. All devices have three 12-bit ADCs, four general-purpose 16-bit timers, and two PWM timers, as well as standard and sophisticated communication interfaces, including up to two I2Cs, three SPIs, and two I2Ss, one SDIO, five USARTs, a USB, and a CAN.

STM32F107VCT6 Features

• Core: ARM? 32-bit Cortex? -M3 CPU

• 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

• Single-cycle multiplication and hardware division

• Memories

• 256 to 512 Kbytes of Flash memory

• up to 64 Kbytes of SRAM

• Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

• LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

• 2.0 to 3.6 V application supply and I/Os

• POR, PDR, and programmable voltage detector (PVD)

• 4-to-16 MHz crystal oscillator

• Internal 8 MHz factory-trimmed RC

• Internal 40 kHz RC with calibration

• 32 kHz oscillator for RTC with calibration

• Low power

• Sleep, Stop and Standby modes

• VBATsupply for RTC and backup registers

• 3 × 12-bit, 1 μs A/D converters (up to 21 channels)

• Conversion range: 0 to 3.6 V

• Triple-sample and hold capability

• Temperature sensor

• 2 × 12-bit D/A converters

• DMA: 12-channel DMA controller

• Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs

• Debug mode

• Serial wire debug (SWD) & JTAG interfaces

• Cortex? -M3 Embedded Trace Macrocell?

• Up to 112 fast I/O ports

• 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

• Up to 11 timers

• Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

• 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop

• 2 × watchdog timers (Independent and Window)

• SysTick timer: a 24-bit down counter

• 2 × 16-bit basic timers to drive the DAC

• Up to 13 communication interfaces

• Up to 2 × I2C interfaces (SMBus/PMBus)

• Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

• Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed

• CAN interface (2.0B Active)

• USB 2.0 full speed interface

• SDIO interface

• CRC calculation unit, 96-bit unique ID

• ECOPACK? packages

STM32F107VCT6 Applications

• Industrial, automotive and other high-end applications