STM32F030C8T6
Or copy the link below:
- Mfr.Part #
- STM32F030C8T6
- Manufacturer
- STMicroelectronics
- Package / Case
- 48-LQFP
- Datasheet
- Download
- Description
- IC MCU 32BIT 64KB FLASH 48LQFP
- Stock
- 7,616
- In Stock ：
- 7,616
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Microcontrollers
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Connectivity :
- I²C, SPI, UART/USART
- Product Status :
- Active
- Oscillator Type :
- Internal
- Voltage - Supply (Vcc/Vdd) :
- 2.4V ~ 3.6V
- Supplier Device Package :
- 48-LQFP (7x7)
- Peripherals :
- DMA, POR, PWM, WDT
- Mounting Type :
- Surface Mount
- Core Processor :
- ARM® Cortex®-M0
- Program Memory Type :
- FLASH
- Speed :
- 48MHz
- Data Converters :
- A/D 12x12b
- Program Memory Size :
- 64KB (64K x 8)
- Number of I/O :
- 39
- Package / Case :
- 48-LQFP
- RAM Size :
- 8K x 8
- EEPROM Size :
- -
- Core Size :
- 32-Bit Single-Core
- Datasheets
- STM32F030C8T6
64KB 64K x 8 FLASH ARM® Cortex®-M0 32-Bit Microcontroller STM32F0 Series STM32F03 48 Pin 48MHz 3.3V 48-LQFP
Description
The STM32F030C8T6 microcontroller features a 48 MHz Arm? Cortex?-M0 32-bit RISC core, high-speed embedded storage (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and a wide range of upgraded peripherals and I/Os. Standard communication interfaces (up to two I2Cs, two SPIs, and up to six USARTs) are available on all devices, as well as one 12-bit ADC, seven general-purpose 16-bit timers, and one advanced-control PWM timer.
From a 2.4 to 3.6V power supply, the STM32F030C8T6 microcontroller runs in the temperature range of -40 to +85 °C. Low-power applications can be designed thanks to a wide collection of power-saving options.
The STM32F030C8T6 microcontroller comes in four different packages with pin counts ranging from 20 to 64. Different peripherals are included depending on the device used. The following description gives an overview of the entire spectrum of STM32F030C8T6 peripherals available.
The STM32F030C8T6 microcontroller's features make it suitable for a wide range of applications, including application control and user interfaces, handheld equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
Features
? Communication interfaces
– Up to two I2C interfaces
– Fast Mode Plus (1 Mbit/s) support on one or two I/Fs, with 20 mA current sink
– SMBus/PMBus support (on single I/F)
– Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
– Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames
? Serial wire debug (SWD)
? All packages ECOPACK?2
? Calendar RTC with alarm and periodic wakeup from Stop/Standby
? 11 timers
– One 16-bit advanced-control timer for six-channel PWM output
– Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
– Independent and system watchdog timers
– SysTick timer
? Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
? Up to 55 fast I/Os
– All mappable on external interrupt vectors
– Up to 55 I/Os with 5V tolerant capability
? 5-channel DMA controller
? One 12-bit, 1.0 μs ADC (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Separate analog supply: 2.4 V to 3.6 V
? Core: Arm? 32-bit Cortex?-M0 CPU, frequency up to 48 MHz
? Memories
– 16 to 256 Kbytes of Flash memory
– 4 to 32 Kbytes of SRAM with HW parity
? CRC calculation unit
? Reset and power management
– Digital & I/Os supply: VDD = 2.4 V to 3.6 V
– Analog supply: VDDA = VDD to 3.6 V
– Power-on/Power down reset (POR/PDR)
– Low power modes: Sleep, Stop, Standby
Applications
-
Application control
-
User interfaces
-
Handheld equipment
-
A/V receivers
-
Digital TV
-
PC peripherals
-
Gaming and GPS platforms
-
Industrial applications,
-
PLCs
-
Inverters
-
Printers
-
Scanners
-
Alarm systems
-
Video intercoms
-
HVACs
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
