STM32F072CBU7TR

STM32F072CBU7TR Description

The STM32F072CBU7TR microcontroller features a high-performance ARM? Cortex?-M0 32-bit RISC CPU running at up to 48 MHz, high-speed embedded storage (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and a wide variety of improved peripherals and I/Os. The standard communication interfaces that each device offers include two I2Cs, two SPI/I2S, one HDMI CEC, four USARTs, one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer, and an advanced-control PWM timer.

The STM32F072CBU7TR microcontroller may be powered by a 2.0 to 3.6 V supply and operates between the temperature ranges of -40 to +85 °C and -40 to +105 °C. Low-power applications can be designed thanks to a wide range of power-saving modes.

Devices for the STM32F072CBU7TR microcontroller are available in seven different packages, with pin counts ranging from 48 to 100. A die form is also available upon request. There are several sets of peripherals included depending on the device selected.

STM32F072CBU7TR Features

• Calendar RTC with alarm and periodic wakeup from Stop/Standby

• 12 timers

– One 16-bit advanced-control timer for six-channel PWM output

– One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control

– Independent and system watchdog timers

– SysTick timer

• Communication interfaces

– Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink; one supporting SMBus/PMBus and wakeup

– Four USARTs supporting master synchronous SPI and modem control; two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature

– Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed

– CAN interface

– USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support

• HDMI CEC wakeup on header reception

• Serial wire debug (SWD)

• 96-bit unique ID

• All packages ECOPACK?2

• Core: ARM? 32-bit Cortex?-M0 CPU, frequency up to 48 MHz

• Memories

– 64 to 128 Kbytes of Flash memory

– 16 Kbytes of SRAM with HW parity

• CRC calculation unit

• Reset and power management

– Digital and I/O supply: VDD = 2.0 V to 3.6 V

– Analog supply: VDDA = VDD to 3.6 V

– Selected I/Os: VDDIO2 = 1.65 V to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low power modes: Sleep, Stop, Standby

– VBAT supply for RTC and backup registers

• Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x6 PLL option

– Internal 40 kHz RC oscillator

– Internal 48 MHz oscillator with automatic trimming based on ext. synchronization

• Up to 87 fast I/Os

– All mappable on external interrupt vectors

– Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2

• Seven-channel DMA controller

• One 12-bit, 1.0 μs ADC (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Separate analog supply: 2.4 V to 3.6 V

• One 12-bit D/A converter (with 2 channels)

• Two fast low-power analog comparators with programmable input and output

• Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors

STM32F072CBU7TR Applications

• Application control and user interfaces

• Hand-held equipment

• A/V receivers and digital TV

• PC peripherals

• Gaming and GPS platforms

• Industrial applications

• PLCs

• Inverters

• Printers

• Scanners

• Alarm systems

• Video intercoms 

• HVACs