MIC4832YMM

MIC4832YMM Overview

Materials in compliance with Tube's specifications.It's no secret that electronic manufacturers are attracted to the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)'s low package cost.This component is mounted to the PCB using Surface Mount.As a standard grade, it's referred to as Type EL Lamp Driver.It requires a power supply voltage to function properly.Always keep it at -40°C~85°C.It continues to operate accurately at 60Hz~1kHz frequency.Having a number of MIC4832 in the device's best part makes it the best.As long as 45μA's supply current is available, this system can function.During operation, the device is in 1 mode.There is a set current of 45μA for the device's supply.Component 8 remains as its pin number.Having 8 pins in total, it has 8 pins in total.There is a subcategory Driver ICs for this item.This mounting is done in a Surface Mount-direction.When this case is used, the output current is set to -.The supplier device package for this device is 8-MSOP.An array of 1 segments is present in the device.The output of 110 V is capable of operating this device.The temperature should be higher than -40°C when the system is in operation.85°C is currently the maximum operating temperature.In terms of supply temperature, its maximum is 75μA.For this device, the supply voltage cannot be changed from 5.5V.Outputs with 2 values are many.Voltages below 0 volts are the only supply voltages it can handle.Channel 1 is currently accessible.Performance-to-cost ratio makes -- Series the best value on the market.

MIC4832YMM Features

Mounting type of Surface Mount
Driver ICs subcategory
Maximum temperature of -40°C
2 outputs

MIC4832YMM Applications

There are a lot of Microchip Technology
MIC4832YMM Lighting Controllers applications.

• DC/DC, DC/AC, and AC/AC converters
• Frequency converters
• Spot welding
• Flashtube ignition
• DC link
• Motor start
• Audio crossover
• UPS buffering
• DC buffering
• Power line buffering