MIC2186YM
Or copy the link below:
- Mfr.Part #
- MIC2186YM
- Manufacturer
- Microchip Technology
- Package / Case
- Datasheet
- Download
- Description
- LOW VOLTAGE PWM CONTROL IC
- Stock
- 18,494
- In Stock ：
- 18,494
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- DC DC Switching Controllers
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Function :
- Step-Up
- Topology :
- Boost
- Synchronous Rectifier :
- No
- Voltage - Supply (Vcc/Vdd) :
- 2.9V ~ 14V
- Duty Cycle (Max) :
- 85%
- Mounting Type :
- Surface Mount
- Clock Sync :
- Yes
- Output Type :
- Transistor Driver
- Output Phases :
- 1
- Supplier Device Package :
- 16-SOIC
- Serial Interfaces :
- -
- Output Configuration :
- Positive
- Number of Outputs :
- 1
- Product Status :
- Active
- Control Features :
- Enable, Frequency Control, Soft Start
- Frequency - Switching :
- 100kHz, 200kHz, 400kHz
- Datasheets
- MIC2186YM
2.9V~14V 16-Pin MIC2186 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 100kHz 200kHz 400kHz Transistor Driver
MIC2186YM Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.9V~14V volts and has 2.9V~14V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 100kHz 200kHz 400kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5 V. In addition to "MIC2186", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Specifically, switching converter falls under the PMIC - Power Management ICs category. DC regulator outputs 12V voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 85 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 440kHz is set for the switching controller. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 2.9 V to 14 V. You should keep dc regulator at -40°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. The dc to dc voltage regulator is from the -- series. 1 functions (s) are included in the switch converters. There would be 16-SOIC supplier dc dc controller package for this part. 700μA volts is the supply current. During switching, this controller has a phase of 1. It is possible for this switching controller to switch at a frequency of 440 kHz. Voltage rating is 14V. The frequency at which this controller can perform well is 400 kHz.
MIC2186YM Features
Transistor Driver Outputs
Switching Frequency: 100kHz 200kHz 400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 440kHz
Switching Frequency: 400 kHz
MIC2186YM Applications
There are a lot of Microchip Technology
MIC2186YM DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
