MIC2168YMM
Or copy the link below:
- Mfr.Part #
- MIC2168YMM
- Manufacturer
- Microchip Technology
- Package / Case
- Datasheet
- Download
- Description
- 1 MHZ PWM SYNCHRONOUS BUCK CONTR
- Stock
- 561
- In Stock ：
- 561
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- DC DC Switching Controllers
- Control Features :
- Current Limit, Enable
- Duty Cycle (Max) :
- 90%
- Mounting Type :
- Surface Mount
- Output Configuration :
- Positive
- Synchronous Rectifier :
- Yes
- Number of Outputs :
- 1
- Serial Interfaces :
- -
- Frequency - Switching :
- 1MHz
- Voltage - Supply (Vcc/Vdd) :
- 3V ~ 14.5V
- Topology :
- Buck
- Output Phases :
- 1
- Function :
- Step-Down
- Clock Sync :
- No
- Output Type :
- Transistor Driver
- Operating Temperature :
- -40°C ~ 125°C (TJ)
- Supplier Device Package :
- 10-MSOP
- Product Status :
- Active
- Datasheets
- MIC2168YMM
3V~14.5V 10-Pin MIC2168 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 1MHz Transistor Driver
MIC2168YMM Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 3V~14.5V. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at 1MHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5 V. Search for "MIC2168" to find other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. In particular, switching converter is a type of PMIC - Power Management ICs. The test statistics indicate that DC regulator outputs a voltage of 15.5V. It is set to 90 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 1MHz is used by the switching controller. To better satisfy the need, DC to DC voltage regulator has a value of ALSO HAS OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 125°C degrees Celsius. The dc to dc voltage regulator belongs to the -- series. In total, the switch converters have 1 function (s). The dc switcher's maximum input voltage is 14.5V, so users must limit the voltage accordingly. The supplier dc dc controller package for this part would be 10-MSOP. A voltage of 3V is required for the supply. There will be 14.5A output current greater than 14.5A from the dc switcher. Datasheets indicate that the switching converter can output 15.5V volts at its maximum. The supply current is 3 mA. There are 1 phases in this controller. There are 1 channels for high-quality communication. This switching controller can switch at a frequency of 1100 kHz. In terms of maximum supply voltage, switching voltage regulators is rated 14.5V. This the controllers dc has a nominal current supply of 3mA. The frequency at which this controller performs well is 1 MHz.
MIC2168YMM Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 1MHz
ALSO HAS OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V
Switching Frequency: 1 MHz
MIC2168YMM Applications
There are a lot of Microchip Technology
MIC2168YMM DC to DC converter applications.
- Servo drive system
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
