MAX800LCSE+
Or copy the link below:
- Mfr.Part #
- MAX800LCSE+
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- Datasheet
- Download
- Description
- IC SUPERVISOR 1 CHANNEL 16SOIC
- Stock
- 2,519
- In Stock ：
- 2,519
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Supervisors
- Reset :
- Active High/Active Low
- Voltage - Threshold :
- 4.65V
- Mounting Type :
- Surface Mount
- Output :
- Open Drain, Push-Pull
- Product Status :
- Active
- Supplier Device Package :
- 16-SOIC
- Operating Temperature :
- 0°C ~ 70°C (TA)
- Reset Timeout :
- 140ms Minimum
- Type :
- Battery Backup Circuit
- Number of Voltages Monitored :
- 1
- Datasheets
- MAX800LCSE+
4.75V 16 Terminals 16-Pin MAX800 Voltage supervisor 1 Channels Min 0V Max 5.5V
MAX800LCSE+ Overview
As you can see, this power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 16-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. According to the specification, the package's peak reflow temperature is specified to be 260. When 4.75V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It has a total of 16 pins that are attached to IC management. This power management has 16 pins. Supply voltage (Vsup) should be at least 0V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. There is a 100μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX800, the base power ics number. A power supply of 5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 100μA.
MAX800LCSE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX800LCSE+ Applications
There are a lot of Maxim Integrated
MAX800LCSE+ Voltage Supervisors applications.
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
