LV8014T-TLM-E

Share

Or copy the link below:

Mfr.Part #
LV8014T-TLM-E
Manufacturer
Sanyo
Package / Case
Datasheet
Download
Description
FORWARD/REVERSE MOTOR DRIVER
Stock
31,105
In Stock :
31,105

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Sanyo
Product Category :
Full Half-Bridge Drivers
Fault Protection :
Over Temperature
Technology :
DMOS
Mounting Type :
Surface Mount
Applications :
DC Motors, General Purpose
Output Configuration :
Half Bridge (4)
Product Status :
Obsolete
Voltage - Load :
2V ~ 7V
Rds On (Typ) :
750mOhm
Current - Output / Channel :
1.4A
Load Type :
Inductive
Operating Temperature :
-20°C ~ 75°C (TA)
Supplier Device Package :
24-TSSOP
Interface :
Logic
Features :
-
Voltage - Supply :
2.7V ~ 5.5V
Current - Peak Output :
2.5A
Datasheets
LV8014T-TLM-E
VESS Electronics offers Full Half-Bridge Drivers Sanyo LV8014T-TLM-E, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Mounting Type:Surface Mount, Operating Temperature:-20°C ~ 75°C (TA), LV8014T-TLM-E pinout, LV8014T-TLM-E datasheet PDF, LV8014T-TLM-E amp .Beyond Full Half-Bridge Drivers Sanyo LV8014T-TLM-E ,we also present a selection of AP1013DEN, NCP51530BDR2G, SIC634CD-T1-GE3, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

Cut Tape (CT) 24-TFSOP (0.173, 4.40mm Width) Logic 2.7V~5.5V Surface Mount -20°C~75°C TA DC Motors, General Purpose Half Bridge (4) Inductive 2V~7V

LV8014T-TLM-E Overview


Cut Tape (CT) is used to package H bridge.As a cost-saving measure, H bridge is included in the 24-TFSOP (0.173, 4.40mm Width) package.Reliabilbridge drivery can be improved by increasing 2.7V~5.5V's supply voltage.Surface Mount is mounted on H bridge circuit.-20°C~75°C TA is able to function normally at motor driver H bridges operating temperature.There are a variety of applications for H bridge motor driver, including DC Motors, General Purpose.In order to mount H gate on the PCB, Surface Mount is used.24 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.As H bridge ic of a signal interface, 24 pins are used as pronged contacts.The base H bridge ic number of LV8014 can be used to find related H bridge ics.The H bridge operates at a voltage of 5V.The analog IC type of this H bridge is AC MOTOR CONTROLLER.When the output reaches 2.5A, a maximum current is reached.The output pins and the power supply pins are conducting 1.4A current.It is the 24 pins that enable this bridge driver to perform its specific functions.The Hbridge is equipped with 2 outputs.Electricity is supplied to the electrical load by 5V.

LV8014T-TLM-E Features


Available in 24-TFSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LV8014
Subcategory: 2.5A


LV8014T-TLM-E Applications


There are a lot of ON Semiconductor
LV8014T-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.


  • Industrial Fans
  • Industrial Automation
  • Home Appliances
  • High-Performance Gaming Motherboards
  • Compact Blade Servers
  • DC-DC Converters
  • Desktop Computers
  • V-Core
  • Non-V-Core
  • Workstations
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

  • Sanyo
    15 A SILICON DIFFUSED JUNCTION T
  • Sanyo
    DBD10 - 1A SINGLE-PHASE BRIDGE R
  • Sanyo
    BRIDGE RECTIFIER DIODE
  • Sanyo
    4A SINGLE-PHASE BRIDGE RECTIFIER
  • Sanyo
    SINGLE-PHASE BRIDGE RECTIFIER

Catalog related products

RFQ