LS404IDT
Or copy the link below:
- Mfr.Part #
- LS404IDT
- Manufacturer
- STMicroelectronics
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SO
- Stock
- 36,410
- In Stock ：
- 36,410
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Supply :
- 1.3mA
- Gain Bandwidth Product :
- 3 MHz
- Voltage - Input Offset :
- 3 mV
- Operating Temperature :
- -40°C ~ 105°C
- Number of Circuits :
- 4
- Output Type :
- -
- Current - Output / Channel :
- 23 mA
- Current - Input Bias :
- 50 nA
- Voltage - Supply Span (Min) :
- 8 V
- Slew Rate :
- 1.5V/µs
- -3db Bandwidth :
- -
- Voltage - Supply Span (Max) :
- 60 V
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 14-SO
- Product Status :
- Obsolete
- Amplifier Type :
- General Purpose
- Datasheets
- LS404IDT
2 Channels 23mA per Channel 50nA 90 dB Instrumentational OP Amps 15V LS404 14 Pins 14-SOIC (0.154, 3.90mm Width)
LS404IDT Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 1.3mA , this buffer op amp will be able to operate. Keeping the voltage gain at 100dB is the best course of action. The buffer amp consists of 4 circuits in total. 2 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 6V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.
LS404IDT Features
14 Pins
supply voltage of 15V
100dB voltage gain
LS404IDT Applications
There are a lot of STMicroelectronics
LS404IDT Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| LS404CD | STMicroelectronics | 29,158 | IC OPAMP GP 4 CIRCUIT 14SO |
| LS404CDT | STMicroelectronics | 40,753 | IC OPAMP GP 4 CIRCUIT 14SO |
| LS404CN | STMicroelectronics | 17,904 | IC OPAMP GP 4 CIRCUIT 14DIP |
| LS404ID | STMicroelectronics | 25,589 | IC OPAMP GP 4 CIRCUIT 14SO |
| LS404IN | STMicroelectronics | 27,324 | IC OPAMP GP 4 CIRCUIT 14DIP |
| LS40K440QP | STMicroelectronics | 1,395 | - |
