LS404CDT

Share

Or copy the link below:

Mfr.Part #
LS404CDT
Manufacturer
STMicroelectronics
Package / Case
Datasheet
Download
Description
IC OPAMP GP 4 CIRCUIT 14SO
Stock
40,753
In Stock :
40,753

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
STMicroelectronics
Product Category :
Instrumentation, OP Amps, Buffer Amps
-3db Bandwidth :
-
Current - Output / Channel :
23 mA
Operating Temperature :
0°C ~ 70°C
Mounting Type :
Surface Mount
Output Type :
-
Current - Input Bias :
100 nA
Voltage - Supply Span (Min) :
8 V
Gain Bandwidth Product :
3 MHz
Current - Supply :
1.5mA
Amplifier Type :
General Purpose
Number of Circuits :
4
Voltage - Input Offset :
3 mV
Voltage - Supply Span (Max) :
60 V
Slew Rate :
1V/µs
Supplier Device Package :
14-SO
Product Status :
Obsolete
Datasheets
LS404CDT
VESS Electronics offers Instrumentation, OP Amps, Buffer Amps STMicroelectronics LS404CDT, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Operating Temperature:0°C ~ 70°C, Mounting Type:Surface Mount, LS404CDT pinout, LS404CDT datasheet PDF, LS404CDT amp .Beyond Instrumentation, OP Amps, Buffer Amps STMicroelectronics LS404CDT ,we also present a selection of OP07CDR, TS321CX5 RFG, NE5532ADR, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

2 Channels 23mA per Channel 100nA 86 dB Instrumentational OP Amps 0.3μA 15V LS404 14 Pins 14-SOIC (0.154, 3.90mm Width)

LS404CDT Overview


There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 1.5mA . It is recommended to keep the voltage gain at 100dB at all times. This op amp contains 4 circuits. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TAPE AND REEL axis. Under 36V is the minimum supply voltage for this electric component. Over 6V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.

LS404CDT Features


14 Pins
supply voltage of 15V
100dB voltage gain


LS404CDT Applications


There are a lot of STMicroelectronics
LS404CDT Instrumentational OP Amps applications.


  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ