LPC660IMX
Or copy the link below:
- Mfr.Part #
- LPC660IMX
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14SOIC
- Stock
- 9,864
- In Stock ：
- 9,864
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Input Offset :
- 1 mV
- Current - Input Bias :
- 0.002 pA
- Mounting Type :
- Surface Mount
- Gain Bandwidth Product :
- 350 kHz
- Voltage - Supply Span (Min) :
- 4.75 V
- Current - Output / Channel :
- 40 mA
- Amplifier Type :
- CMOS
- Product Status :
- Obsolete
- -3db Bandwidth :
- -
- Current - Supply :
- 160µA (x4 Channels)
- Slew Rate :
- 0.11V/µs
- Voltage - Supply Span (Max) :
- 15.5 V
- Supplier Device Package :
- 14-SOIC
- Number of Circuits :
- 4
- Operating Temperature :
- -40°C ~ 85°C
- Output Type :
- Push-Pull, Rail-to-Rail
- Datasheets
- LPC660IMX
40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LPC660 14 Pins 14-SOIC (0.154, 3.90mm Width)
LPC660IMX Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 160μA, this op amp ic can operate. Keeping the voltage gain at 120dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
LPC660IMX Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LPC660IMX Applications
There are a lot of Texas Instruments
LPC660IMX Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
