LPC660IM
Or copy the link below:
- Mfr.Part #
- LPC660IM
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14SOIC
- Stock
- 29,330
- In Stock ：
- 29,330
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Type :
- Push-Pull, Rail-to-Rail
- Slew Rate :
- 0.11V/µs
- Current - Output / Channel :
- 40 mA
- Product Status :
- Obsolete
- Number of Circuits :
- 4
- Voltage - Supply Span (Min) :
- 4.75 V
- Current - Input Bias :
- 0.002 pA
- Operating Temperature :
- -40°C ~ 85°C
- Supplier Device Package :
- 14-SOIC
- Gain Bandwidth Product :
- 350 kHz
- Voltage - Input Offset :
- 1 mV
- Mounting Type :
- Surface Mount
- -3db Bandwidth :
- -
- Amplifier Type :
- CMOS
- Current - Supply :
- 160µA (x4 Channels)
- Voltage - Supply Span (Max) :
- 15.5 V
- Datasheets
- LPC660IM
40mA per Channel 0.002pA 63 dB Instrumentational OP Amps 4.75V~15.5V ±2.38V~7.75V LPC660 14 Pins 14-SOIC (0.154, 3.90mm Width)
LPC660IM Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 160μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. This op amp ic has 4 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LPC660IM Features
14 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LPC660IM Applications
There are a lot of Texas Instruments
LPC660IM Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
