LP3470IM5X-2.83
Or copy the link below:
- Mfr.Part #
- LP3470IM5X-2.83
- Manufacturer
- Texas Instruments
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC SUPERVISOR 1 CHANNEL SOT23-5
- Stock
- 27,719
- In Stock ：
- 27,719
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Supervisors
- Reset Timeout :
- 1ms Minimum
- Reset :
- Active Low
- Type :
- Simple Reset/Power-On Reset
- Operating Temperature :
- -40°C ~ 85°C (TJ)
- Number of Voltages Monitored :
- 1
- Mounting Type :
- Surface Mount
- Voltage - Threshold :
- 2.83V
- Supplier Device Package :
- SOT-23-5
- Package / Case :
- SC-74A, SOT-753
- Output :
- Open Drain or Open Collector
- Product Status :
- Obsolete
- Datasheets
- LP3470IM5X-2.83
1V 5 Terminals 5-Pin LP3470 Voltage supervisor 1 Channels Min 500mV Max 5.5V
LP3470IM5X-2.83 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. In total, the power management has 5 pins in it. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 500mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 16μA is the recommended value. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470IM5X-2.83 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5X-2.83 Applications
There are a lot of Texas Instruments
LP3470IM5X-2.83 Voltage Supervisors applications.
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
- Sensitive sensors
- Efficient information transmission
- Functional modules
- Consumer electronics
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
