LCS702HG

Share

Or copy the link below:

Mfr.Part #
LCS702HG
Manufacturer
Power Integrations
Package / Case
16-SSIP, 13 Leads, Exposed Pad, Formed Leads
Datasheet
Download
Description
IC LLC CTRL MFET 220W ESIP16C
Stock
16,195
In Stock :
16,195

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Power Integrations
Product Category :
Full Half-Bridge Drivers
Rds On (Typ) :
740mOhm
Technology :
Power MOSFET
Package / Case :
16-SSIP, 13 Leads, Exposed Pad, Formed Leads
Current - Output / Channel :
-
Interface :
On/Off
Mounting Type :
Through Hole
Features :
Auto Restart, Slew Rate Controlled
Supplier Device Package :
eSIP-16J
Current - Peak Output :
10.3A
Operating Temperature :
-40°C ~ 150°C (TJ)
Load Type :
Inductive
Output Configuration :
Half Bridge
Applications :
General Purpose
Fault Protection :
Current Limiting, Over Temperature, Over Voltage, Short Circuit, UVLO
Voltage - Supply :
11.4V ~ 15V
Product Status :
Active
Voltage - Load :
11.4V ~ 15V
Datasheets
LCS702HG
VESS Electronics offers Full Half-Bridge Drivers Power Integrations LCS702HG, where excellence in quality meets cost-effectiveness. This premier offering shines with its comprehensive list of features, including Package / Case:16-SSIP, 13 Leads, Exposed Pad, Formed Leads, Mounting Type:Through Hole, Operating Temperature:-40°C ~ 150°C (TJ), LCS702HG pinout, LCS702HG datasheet PDF, LCS702HG amp .Beyond Full Half-Bridge Drivers Power Integrations LCS702HG ,we also present a selection of AP1013DEN, NCP51530BDR2G, SIC634CD-T1-GE3, Our extensive stock is ready to fulfill your requirements. Connect with us now for tailored solutions.

Tube 16-SSIP, 13 Leads, Exposed Pad, Formed Leads On/Off 11.4V~15V Through Hole -40°C~150°C TJ General Purpose Half Bridge Inductive 11.4V~15V

LCS702HG Overview


Packaged using Tube.Cost savings are achieved by including H bridge in the 16-SSIP, 13 Leads, Exposed Pad, Formed Leads package.Based on 11.4V~15V, improved reliabilbridge drivery can be achieved.Mounted on Through Hole.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver can be used for a variety of purposes, including General Purpose.Using Through Hole, the board is mounted.Auto Restart, Slew Rate Controlled is also one of full bridges specific characteristics.13 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.A signal interface uses 16 pins as pronged contacts.With a supply voltage of 12V, H bridge circuit operates.This is one of the types of electronic H-bridges in the HiperLCS™ series.An ambient temperature of 10.3A enables a power supply to provide a maximum load current.Through the pins of the power supply and output, there is a current of 8.3A.The Hbridge has 1 outputs.

LCS702HG Features


Available in 16-SSIP, 13 Leads, Exposed Pad, Formed Leads Package / Case
Operating Temperature at the range of Through Hole


LCS702HG Applications


There are a lot of Power Integrations
LCS702HG Full Bridge Drivers, Half-Bridge Drivers applications.


  • Home Appliances
  • High-Performance Gaming Motherboards
  • Compact Blade Servers
  • DC-DC Converters
  • Desktop Computers
  • V-Core
  • Non-V-Core
  • Workstations
  • High-Current DC-DC Point-of-Load Converters
  • Networking Microprocessor Voltage Regulators
Purchase

You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

  • Power Integrations
    DIODE ARRAY GP 200V 5A TO252
  • Power Integrations
    DIODE RECT GP 300V 10A TO263
  • Power Integrations
    DIODE ARRAY SCHOTTKY 300V TO247
  • Power Integrations
    DIODE ARRAY SCHOTTKY 300V TO247
  • Power Integrations
    DIODE ARRAY SCHOTTKY 300V TO220

Catalog related products

RFQ