FPF1108
Or copy the link below:
- Mfr.Part #
- FPF1108
- Manufacturer
- Fairchild Semiconductor
- Package / Case
- 4-UFBGA, WLCSP
- Datasheet
- Download
- Description
- BUFFER/INVERTER BASED PERIPHERAL
- Stock
- 10,137
- In Stock ：
- 10,137
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Fairchild Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Interface :
- On/Off
- Voltage - Load :
- 1.2V ~ 4V
- Rds On (Typ) :
- 35mOhm
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Product Status :
- Active
- Supplier Device Package :
- 4-WLCSP (0.96x0.96)
- Input Type :
- Non-Inverting
- Mounting Type :
- Surface Mount
- Number of Outputs :
- 1
- Current - Output (Max) :
- 1.2A
- Fault Protection :
- -
- Output Configuration :
- High Side
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Features :
- Load Discharge, Slew Rate Controlled
- Output Type :
- P-Channel
- Package / Case :
- 4-UFBGA, WLCSP
- Ratio - Input:Output :
- 1:1
- Switch Type :
- General Purpose
- Datasheets
- FPF1108
P-Channel 0.5mm PMIC IntelliMAX™ Series FPF1108 4 Pin 4-UFBGA, WLCSP
FPF1108 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 4-UFBGA, WLCSP package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.As you can see, it comes from the FPF1108 family.A total of 4 terminations can be found in it.During operation, the 4 pins are used.To comply with the operation criteria, the maximum output current is reduced to 1.2A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 150mOhm resistance in the LED driving board.It is included in the IntelliMAX™ series.The maximum input voltage of the LED driver is 4V volts.There is a minimum input voltage of 1.2V volts for this LED driver.
FPF1108 Features
Resistance of 150mOhm
FPF1108 Applications
There are a lot of ON Semiconductor
FPF1108 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
