FPF1005
Or copy the link below:
- Mfr.Part #
- FPF1005
- Manufacturer
- onsemi
- Package / Case
- 6-WDFN Exposed Pad
- Datasheet
- Download
- Description
- IC PWR SWITCH P-CH 1:1 6MICROFET
- Stock
- 32,508
- In Stock ：
- 32,508
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- onsemi
- Product Category :
- Power Distribution Switches, Load Drivers
- Rds On (Typ) :
- 50mOhm
- Features :
- Load Discharge, Slew Rate Controlled
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Input Type :
- Non-Inverting
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Interface :
- On/Off
- Voltage - Load :
- 1.2V ~ 5.5V
- Product Status :
- Last Time Buy
- Output Type :
- P-Channel
- Supplier Device Package :
- 6-MicroFET (2x2)
- Package / Case :
- 6-WDFN Exposed Pad
- Mounting Type :
- Surface Mount
- Output Configuration :
- High Side
- Fault Protection :
- -
- Number of Outputs :
- 1
- Switch Type :
- General Purpose
- Current - Output (Max) :
- 1.5A
- Ratio - Input:Output :
- 1:1
- Datasheets
- FPF1005
P-Channel PMIC IntelliMAX™ Series FPF1005 6 Pin 3.3V 6-VDFN Exposed Pad
FPF1005 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 6-VDFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Load Discharge, Slew Rate Controlled features.It comes under the family of FPF1005.A total of 6 terminations have been recorded.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 1.5A.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way.Currently, the LED driving board has 50mOhm resistance.It is part of the IntelliMAX™ series.Input voltage is limited to 5.5V volts.A voltage of 1.2V volts is the minimum input voltage.
FPF1005 Features
Supplied from 3.3V
Resistance of 50mOhm
FPF1005 Applications
There are a lot of ON Semiconductor
FPF1005 Power Switches ICs applications.
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| FPF1003 | onsemi | 14,748 | BUFFER/INVERTER PERIPHL DRIVER |
| FPF1003 | onsemi | 42,780 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1003A | onsemi | 20,137 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1004 | onsemi | 8,106 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1004 | onsemi | 19,958 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1006 | onsemi | 28,839 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1006 | onsemi | 24,007 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1007 | onsemi | 2,431 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1008 | onsemi | 17,650 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1009 | onsemi | 33,986 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1009R | onsemi | 35,682 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1013 | onsemi | 3,000 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1013 | onsemi | 26,984 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1013 | onsemi | 6,865 | IC PWR SWITCH N-CHAN 1:1 6WLCSP |
| FPF1013_P | onsemi | 47,187 | IC LOAD SWITCH 1V ADVANCE 6WLCSP |
