FPF1104
Or copy the link below:
- Mfr.Part #
- FPF1104
- Manufacturer
- Fairchild Semiconductor
- Package / Case
- 4-UFBGA, WLCSP
- Datasheet
- Download
- Description
- BUFFER/INVERTER BASED PERIPHERAL
- Stock
- 9,590
- In Stock ：
- 9,590
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Fairchild Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Fault Protection :
- -
- Switch Type :
- General Purpose
- Number of Outputs :
- 1
- Mounting Type :
- Surface Mount
- Output Type :
- P-Channel
- Current - Output (Max) :
- 1.2A
- Interface :
- On/Off
- Features :
- Load Discharge, Slew Rate Controlled
- Output Configuration :
- High Side
- Input Type :
- Non-Inverting
- Supplier Device Package :
- 4-WLCSP (0.96x0.96)
- Rds On (Typ) :
- 35mOhm
- Ratio - Input:Output :
- 1:1
- Package / Case :
- 4-UFBGA, WLCSP
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Voltage - Load :
- 1.2V ~ 4V
- Product Status :
- Active
- Datasheets
- FPF1104
P-Channel 0.5mm PMIC IntelliMAX™ Series FPF1104 4 Pin 4-UFBGA, WLCSP
FPF1104 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 4-UFBGA, WLCSP.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Load Discharge, Slew Rate Controlled features.It comes under the family of FPF1104.A total of 4 terminations have been recorded.The operation is performed through the 4 pins.This operation requires the maximum output current to be decreased to 1.2A.Surface Mount is mounted in the way.Currently, the LED driving board has 150mOhm resistance.It is part of the IntelliMAX™ series.Input voltage is limited to 4V volts.A voltage of 1.2V volts is the minimum input voltage.
FPF1104 Features
Resistance of 150mOhm
FPF1104 Applications
There are a lot of ON Semiconductor
FPF1104 Power Switches ICs applications.
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
