FPF1018
Or copy the link below:
- Mfr.Part #
- FPF1018
- Manufacturer
- onsemi
- Package / Case
- 6-VDFN Exposed Pad
- Datasheet
- Download
- Description
- IC PWR SWITCH N-CH 1:1 6MICROFET
- Stock
- 9,033
- In Stock ：
- 9,033
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- onsemi
- Product Category :
- Power Distribution Switches, Load Drivers
- Interface :
- On/Off
- Switch Type :
- General Purpose
- Number of Outputs :
- 1
- Mounting Type :
- Surface Mount
- Output Type :
- N-Channel
- Input Type :
- Non-Inverting
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Fault Protection :
- -
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Output Configuration :
- High Side
- Rds On (Typ) :
- 34mOhm
- Product Status :
- Last Time Buy
- Current - Output (Max) :
- 1.5A
- Supplier Device Package :
- 6-MicroFET (2x2)
- Ratio - Input:Output :
- 1:1
- Voltage - Load :
- 0.8V ~ 1.8V
- Features :
- Load Discharge, Slew Rate Controlled
- Package / Case :
- 6-VDFN Exposed Pad
- Datasheets
- FPF1018
N-Channel PMIC IntelliMAX™ Series FPF1018 6 Pin 6-VDFN Exposed Pad
FPF1018 Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It is part of the FPF1018 family of LED drivers.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.This results in the maximum output current dropping to 1.5A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 45mOhm resistance are used.A component of this type is included in the IntelliMAX™ series.This case results in a 1.5A output current.When using this LED driving board, it is recommended that the supply voltage is set to 1.8V.There is a maximum input voltage of 1.8V volts.The input voltage minimum is 800mV volts.There is a maximum current requirement of 1μA for its operation.
FPF1018 Features
Resistance of 45mOhm
FPF1018 Applications
There are a lot of ON Semiconductor
FPF1018 Power Switches ICs applications.
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| FPF1003 | onsemi | 14,748 | BUFFER/INVERTER PERIPHL DRIVER |
| FPF1003 | onsemi | 42,780 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1003A | onsemi | 20,137 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1004 | onsemi | 8,106 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1004 | onsemi | 19,958 | IC PWR SWITCH P-CHAN 1:1 6WLCSP |
| FPF1005 | onsemi | 32,508 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1006 | onsemi | 28,839 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1006 | onsemi | 24,007 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1007 | onsemi | 2,431 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1008 | onsemi | 17,650 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1009 | onsemi | 33,986 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1009R | onsemi | 35,682 | IC PWR SWITCH P-CH 1:1 6MICROFET |
| FPF1013 | onsemi | 3,000 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1013 | onsemi | 26,984 | BUFFER/INVERTER BASED PERIPHERAL |
| FPF1013 | onsemi | 6,865 | IC PWR SWITCH N-CHAN 1:1 6WLCSP |
