FPF1015
Or copy the link below:
- Mfr.Part #
- FPF1015
- Manufacturer
- Fairchild Semiconductor
- Package / Case
- 6-VDFN Exposed Pad
- Datasheet
- Download
- Description
- BUFFER/INVERTER BASED PERIPHERAL
- Stock
- 14,013
- In Stock ：
- 14,013
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Fairchild Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Ratio - Input:Output :
- 1:1
- Voltage - Load :
- 0.8V ~ 1.8V
- Interface :
- On/Off
- Rds On (Typ) :
- 34mOhm
- Supplier Device Package :
- 6-MicroFET (2x2)
- Fault Protection :
- -
- Output Configuration :
- High Side
- Number of Outputs :
- 1
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Mounting Type :
- Surface Mount
- Input Type :
- Non-Inverting
- Output Type :
- N-Channel
- Switch Type :
- General Purpose
- Current - Output (Max) :
- 1.5A
- Features :
- Load Discharge, Slew Rate Controlled
- Package / Case :
- 6-VDFN Exposed Pad
- Product Status :
- Active
- Datasheets
- FPF1015
N-Channel PMIC IntelliMAX™ Series FPF1015 6 Pin 6-VDFN Exposed Pad
FPF1015 Overview
Tape & Reel (TR) is how it's packaged.The 6-VDFN Exposed Pad package includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the family FPF1015.The termination count is 6.The 6 pins are used to operate the LED driver.The maximum output current must drop to 1.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.45mOhm resistance is present in the lighting driver.Electrical components such as this are included in the IntelliMAX™ series.In this case, the output current is set to 1.5A.In order to achieve the best efficiency, the supply voltage should be set to 1.8V.This LED driver can handle voltages up to 1.8V volts.As far as input voltage goes, it has a minimum of 800mV volts.1μA is the maximum current required to operate it.
FPF1015 Features
Resistance of 45mOhm
FPF1015 Applications
There are a lot of ON Semiconductor
FPF1015 Power Switches ICs applications.
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
