EPC2TI32

EPC2TI32 Overview

FPGA uses a nice 32-TQFP package that makes FPGA easy to use.External packaging for the Tray series.-40°C~85°C license holder.In System Programmable is the program that allows it to be programmed.This device is fed with a voltage of 3V~3.6V 4.5V~5.5V which is applied to it.There is a memory device mounted in Surface Mount position for this device.There is a limit of 1.6Mb MB for the amount of data that can be stored.Look for "EPC2" for other related parts.The supply voltage of the device must be 3.3V in order to operate correctly.There are different functions that can be applied on the 32 axis when it comes to terminating.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The reflow soldering process should be done at a temperature no higher than 235.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.The memory chip is allowed to operate at a voltage that is no greater than 0.05mA.I think it's important to point out that this is a memory IC that has a 12.5MHz frequency that can be operated at.A power supply that is rated at 3.3/5V is recommended for use with this product.Our product line now includes IT CAN ALSO OPERATE AT 5V SUPPLY in order to provide a better level of service to our customers.Among the EPC series of devices, it is one of the most popular ones.

EPC2TI32 Features

Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.

EPC2TI32 Applications

There are a lot of Intel
EPC2TI32 applications of configuration proms for FPGAs.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card