DS4510U-10+
Or copy the link below:
- Mfr.Part #
- DS4510U-10+
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- Datasheet
- Download
- Description
- IC SUPERVISOR 1 CHANNEL 10UMAX
- Stock
- 30,010
- In Stock ：
- 30,010
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Supervisors
- Mounting Type :
- Surface Mount
- Output :
- Open Drain or Open Collector
- Type :
- Simple Reset/Power-On Reset
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Reset Timeout :
- Adjustable/Selectable
- Number of Voltages Monitored :
- 1
- Voltage - Threshold :
- 4.375V
- Reset :
- Active Low
- Product Status :
- Obsolete
- Supplier Device Package :
- 10-uMAX/uSOP
- Datasheets
- DS4510U-10+
5V 10 Terminals 10-Pin DS4510 Voltage supervisor 1 Channels 400kHz Min 2.7V Max 5.5V
DS4510U-10 Overview
A total of 10 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 245 is specified for the package. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There are a total of 10 pins on power management. Power managment ic pin count is 10. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use DS4510, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. For the majority of applications, the frequency of this IC management is 400kHz Hz, which is sufficient for most applications. A memory zone of 64B is available for this IC power.
DS4510U-10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
DS4510U-10 Applications
There are a lot of Maxim Integrated
DS4510U-10 Voltage Supervisors applications.
- Power distribution systems of ICU
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
