DG308BDJ-E3
Or copy the link below:
- Mfr.Part #
- DG308BDJ-E3
- Manufacturer
- Vishay
- Package / Case
- Datasheet
- Download
- Description
- IC SWITCH QUAD CMOS 16DIP
- Stock
- 87
- In Stock ：
- 87
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Vishay
- Product Category :
- Analog Switches, Multiplexers, Demultiplexers
- Charge Injection :
- 1pC
- Product Status :
- Active
- Channel-to-Channel Matching (ΔRon) :
- 1.7Ohm
- Number of Circuits :
- 4
- Voltage - Supply, Single (V+) :
- 4V ~ 44V
- Current - Leakage (IS(off)) (Max) :
- 500pA
- -3db Bandwidth :
- -
- Multiplexer/Demultiplexer Circuit :
- 1:1
- Operating Temperature :
- -40°C ~ 85°C (TA)
- On-State Resistance (Max) :
- 85Ohm
- Channel Capacitance (CS(off), CD(off)) :
- 5pF, 5pF
- Supplier Device Package :
- 16-PDIP
- Switch Time (Ton, Toff) (Max) :
- 200ns, 150ns
- Switch Circuit :
- SPST - NO
- Mounting Type :
- Through Hole
- Voltage - Supply, Dual (V±) :
- ±4V ~ 22V
- Crosstalk :
- -95dB @ 100kHz
- Datasheets
- DG308BDJ-E3
200ns, 150ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)
DG308BDJ-E3 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for the analog switch ic with DG308 if you are looking for variants. As far as internal resistance is concerned, it has 160Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 44V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 4V. This digital switch can be operated with a current of 1μA. Put voltage above 1μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 4V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages range from 22V. The 4 inputs need to be operated in order to work. There is 85Ohm resistance between Drain and Source for this electronic part.
DG308BDJ-E3 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Drain-to-Source resistance: 85Ohm
DG308BDJ-E3 Applications
There are a lot of Vishay Siliconix
DG308BDJ-E3 Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| DG3000DB-T1-E1 | Vishay | 22,743 | IC SWITCH SPST 6-MICRO FOOT |
| DG3001DB-T1-E1 | Vishay | 4,724 | IC SWITCH SPST 6-MICRO FOOT |
| DG3002DB-T1-E1 | Vishay | 32,953 | IC SWITCH SPST 6-MICRO FOOT |
| DG3003DB-T1-E1 | Vishay | 12,710 | IC SWITCH SPST 6-MICRO FOOT |
| DG300A/BCA | Vishay | 2,793 | DG300A - SPST, 2 FUNC, CMOS - DU |
| DG300A/BIA | Vishay | 96 | DUAL MARKED (M38510/11601BIA) |
| DG300AAA/883 | Vishay | 6,770 | IC SWITCH DUAL SPST TO100-10 |
| DG300AAK | Vishay | 10,730 | IC SWITCH DUAL SPST TO100-10 |
| DG300AAK | Vishay | 19,949 | TTL COMPATIBLE CMOS ANALOG SWITC |
| DG300AAK/883 | Vishay | 8,062 | IC SWITCH DUAL SPST TO100-10 |
| DG300ABA | Vishay | 32,807 | IC SWITCH DUAL SPST TO100-10 |
| DG300ABWE+ | Vishay | 36,151 | IC SWITCH DUAL SPST 16SOIC |
| DG300AC/D | Vishay | 9,342 | IC SWITCH DUAL SPST 10PIN |
| DG300ACA | Vishay | 19,465 | TTL-COMPATIBLE ANALOG SWITCH |
| DG300ACJ | Vishay | 725 | CMOS ANALOG SWITCH |
