DG303BDY-E3
Or copy the link below:
- Mfr.Part #
- DG303BDY-E3
- Manufacturer
- Vishay
- Package / Case
- Datasheet
- Download
- Description
- IC SWITCH CMOS 14SOIC
- Stock
- 79
- In Stock ：
- 79
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Vishay
- Product Category :
- Analog Switches, Multiplexers, Demultiplexers
- Current - Leakage (IS(off)) (Max) :
- 1nA
- Crosstalk :
- -74dB @ 500kHz
- Charge Injection :
- 8pC
- Channel Capacitance (CS(off), CD(off)) :
- 14pF, 14pF
- Switch Circuit :
- DPST - NO/NC
- Product Status :
- Active
- Channel-to-Channel Matching (ΔRon) :
- -
- Switch Time (Ton, Toff) (Max) :
- 300ns, 250ns
- Voltage - Supply, Dual (V±) :
- ±15V
- -3db Bandwidth :
- -
- Voltage - Supply, Single (V+) :
- -
- Number of Circuits :
- 2
- Mounting Type :
- Surface Mount
- Multiplexer/Demultiplexer Circuit :
- 2:1
- Supplier Device Package :
- 14-SOIC
- Operating Temperature :
- -40°C ~ 85°C (TA)
- On-State Resistance (Max) :
- 50Ohm
- Datasheets
- DG303BDY-E3
300ns, 250ns DPST - NO/NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG303 14 Pins 1nA 15V 14-SOIC (0.154, 3.90mm Width)
DG303BDY-E3 Overview
As the electronic part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 14. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 14 pins. Circuits based on DPST - NO/NC switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with DG303 to find analog multiplexer variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. Datasheets for 14 pin functions are available upon request. Multiplexers should not be powered above 36V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 13V. An operating current of 230μA would be sufficient for this switch device. When the digital multiplexer is charged above 1mA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 15V operating voltages can be used with this electrical part. Operating the 4 inputs requires 4 inputs. It has a Drain to Source resistance of 30Ohm ohms.
DG303BDY-E3 Features
1 Channels
Switch Circuit: DPST - NO/NC
230μA Supply Current
Drain-to-Source resistance: 30Ohm
DG303BDY-E3 Applications
There are a lot of Vishay Siliconix
DG303BDY-E3 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| DG3000DB-T1-E1 | Vishay | 22,743 | IC SWITCH SPST 6-MICRO FOOT |
| DG3001DB-T1-E1 | Vishay | 4,724 | IC SWITCH SPST 6-MICRO FOOT |
| DG3002DB-T1-E1 | Vishay | 32,953 | IC SWITCH SPST 6-MICRO FOOT |
| DG3003DB-T1-E1 | Vishay | 12,710 | IC SWITCH SPST 6-MICRO FOOT |
| DG300A/BCA | Vishay | 2,793 | DG300A - SPST, 2 FUNC, CMOS - DU |
| DG300A/BIA | Vishay | 96 | DUAL MARKED (M38510/11601BIA) |
| DG300AAA/883 | Vishay | 6,770 | IC SWITCH DUAL SPST TO100-10 |
| DG300AAK | Vishay | 10,730 | IC SWITCH DUAL SPST TO100-10 |
| DG300AAK | Vishay | 19,949 | TTL COMPATIBLE CMOS ANALOG SWITC |
| DG300AAK/883 | Vishay | 8,062 | IC SWITCH DUAL SPST TO100-10 |
| DG300ABA | Vishay | 32,807 | IC SWITCH DUAL SPST TO100-10 |
| DG300ABWE+ | Vishay | 36,151 | IC SWITCH DUAL SPST 16SOIC |
| DG300AC/D | Vishay | 9,342 | IC SWITCH DUAL SPST 10PIN |
| DG300ACA | Vishay | 19,465 | TTL-COMPATIBLE ANALOG SWITCH |
| DG300ACJ | Vishay | 725 | CMOS ANALOG SWITCH |
