CD4053BM
- Mfr.Part #
- CD4053BM
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC MUX/DEMUX TRIPLE 2X1 16SOIC
- Stock
- 2,671
- In Stock :
- 2,671
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Analog Switches, Multiplexers, Demultiplexers
- -3db Bandwidth :
- 30MHz
- Voltage - Supply, Single (V+) :
- 3V ~ 20V
- Multiplexer/Demultiplexer Circuit :
- 2:1
- Switch Circuit :
- SPDT
- Operating Temperature :
- -55°C ~ 125°C (TA)
- Number of Circuits :
- 3
- Current - Leakage (IS(off)) (Max) :
- 100nA
- Mounting Type :
- Surface Mount
- On-State Resistance (Max) :
- 240Ohm
- Charge Injection :
- -
- Channel Capacitance (CS(off), CD(off)) :
- 0.2pF, 9pF
- Product Status :
- Active
- Voltage - Supply, Dual (V±) :
- ±2.5V ~ 9V
- Crosstalk :
- -40dB @ 6MHz
- Switch Time (Ton, Toff) (Max) :
- -
- Supplier Device Package :
- 16-SOIC
- Channel-to-Channel Matching (ΔRon) :
- 5Ohm
- Datasheets
- CD4053BM
SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)
CD4053BM Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Search with CD4053 if you are looking for analog multiplexer variants. It has an internal resistance of 240Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 20V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 3V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 80nA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. In the case of dual power supplies, you should connect at least 2.5V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 18V operating voltages for the electrical part. There are 6 inputs to be operated. The transfer of data can be performed over 30MHz bandwidths. The Drain to Source resistance of this electronic component is 125Ohm.
CD4053BM Features
2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 125Ohm
CD4053BM Applications
There are a lot of Texas Instruments
CD4053BM Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.












