BD8303MUV-E2
Or copy the link below:
- Mfr.Part #
- BD8303MUV-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- 16-VFQFN Exposed Pad
- Datasheet
- Download
- Description
- IC REG CTRLR BUCK-BOOST VQFNV
- Stock
- 2,817
- In Stock ：
- 2,817
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- DC DC Switching Controllers
- Product Status :
- Active
- Output Configuration :
- Positive
- Output Phases :
- 2
- Synchronous Rectifier :
- Yes
- Clock Sync :
- No
- Topology :
- Buck-Boost
- Function :
- Step-Up/Step-Down
- Operating Temperature :
- -25°C ~ 85°C (TA)
- Voltage - Supply (Vcc/Vdd) :
- 2.7V ~ 14V
- Number of Outputs :
- 2
- Package / Case :
- 16-VFQFN Exposed Pad
- Frequency - Switching :
- 200kHz ~ 1MHz
- Mounting Type :
- Surface Mount
- Output Type :
- Transistor Driver
- Supplier Device Package :
- VQFN016V3030
- Duty Cycle (Max) :
- 90%
- Serial Interfaces :
- -
- Control Features :
- Enable, Frequency Control
- Datasheets
- BD8303MUV-E2
16 Terminals 2.7V~14V 16-Pin BD830* DC to DC converter IC DUAL SWITCHING CONTROLLER 2 Outputs 200kHz~1MHz Transistor Driver
BD8303MUV-E2 Overview
With its 16-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 2.7V~14V and has a 2.7V~14V supply voltage. Worked in a -25°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 200kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 7.4V is input. Searching "BD830*" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 12V. If you are starting a new project, you should note the dc dc regulator's typical output current is 20μA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. In order to ensure the dc switcher's functionality, users must limit the voltage to 14V due to the dc switcher's maximum input voltage. In order to use a 2.7V voltage supply, switching controller is necessary to have one. Datasheets state the switching converter can output up to 12V volts. At least 1.8V voltage is output by the voltage controller.
BD8303MUV-E2 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
BD8303MUV-E2 Applications
There are a lot of ROHM Semiconductor
BD8303MUV-E2 DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
