BD82001FVJ-E2
Or copy the link below:
- Mfr.Part #
- BD82001FVJ-E2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC PWR SWITCH N-CHAN 1:1 8TSSOP
- Stock
- 645
- In Stock ：
- 645
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Fault Protection :
- Current Limiting (Fixed), Over Temperature, UVLO
- Supplier Device Package :
- 8-TSSOP-BJ
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Current - Output (Max) :
- 1A
- Ratio - Input:Output :
- 1:1
- Mounting Type :
- Surface Mount
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Rds On (Typ) :
- 70mOhm
- Output Configuration :
- High Side
- Input Type :
- Non-Inverting
- Features :
- Slew Rate Controlled, Status Flag
- Voltage - Load :
- 2.7V ~ 5.5V
- Interface :
- On/Off
- Output Type :
- N-Channel
- Number of Outputs :
- 1
- Product Status :
- Active
- Switch Type :
- USB Switch
- Datasheets
- BD82001FVJ-E2
5V N-Channel 0.65mm PMIC BD82001 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
BD82001FVJ-E2 Overview
A Tape & Reel (TR) is used to package it.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.The LED driver is mounted as Surface Mount.USB Switch is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled, Status Flag features is available.It is a member of the BD82001 family.In total, there are 8 terminations.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current is reduced to 1A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 8 pins.It has a resistance of 110MOhm.A maximum supply voltage of 5.5V is set in Vsup.Normal operation requires Vsup above 2.7V.5V is the power supply of the part.
BD82001FVJ-E2 Features
Supplied from 5V
Resistance of 110MOhm
BD82001FVJ-E2 Applications
There are a lot of ROHM Semiconductor
BD82001FVJ-E2 Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
