BD82000FVJ-LBE2
Or copy the link below:
- Mfr.Part #
- BD82000FVJ-LBE2
- Manufacturer
- ROHM Semiconductor
- Package / Case
- Datasheet
- Download
- Description
- IC PWR SWITCH N-CHAN 1:1 8TSSOP
- Stock
- 2,358
- In Stock ：
- 2,358
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Power Distribution Switches, Load Drivers
- Rds On (Typ) :
- 70mOhm
- Product Status :
- Active
- Operating Temperature :
- -40°C ~ 85°C (TA)
- Switch Type :
- USB Switch
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Voltage - Load :
- 2.7V ~ 5.5V
- Features :
- Slew Rate Controlled, Status Flag
- Output Configuration :
- High Side
- Output Type :
- N-Channel
- Ratio - Input:Output :
- 1:1
- Supplier Device Package :
- 8-TSSOP-BJ
- Mounting Type :
- Surface Mount
- Current - Output (Max) :
- 1A
- Interface :
- On/Off
- Input Type :
- Non-Inverting
- Number of Outputs :
- 1
- Fault Protection :
- Current Limiting (Fixed), Over Temperature, UVLO
- Datasheets
- BD82000FVJ-LBE2
N-Channel 0.65mm PMIC 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
BD82000FVJ-LBE2 Overview
It is packaged in the form of a Cut Tape (CT).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.A total of 8 terminations can be found in it.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
BD82000FVJ-LBE2 Features
Supplied from 5V
BD82000FVJ-LBE2 Applications
There are a lot of ROHM Semiconductor
BD82000FVJ-LBE2 Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
