VN751STR
Or copy the link below:
- Mfr.Part #
- VN751STR
- Manufacturer
- STMicroelectronics
- Package / Case
- Datasheet
- Download
- Description
- IC PWR DRIVER N-CHANNEL 1:1 8SO
- Stock
- 4,923
- In Stock ：
- 4,923
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Power Distribution Switches, Load Drivers
- Switch Type :
- General Purpose
- Supplier Device Package :
- 8-SOIC
- Operating Temperature :
- -40°C ~ 150°C (TJ)
- Output Configuration :
- High Side
- Input Type :
- Non-Inverting
- Fault Protection :
- Current Limiting (Fixed), Over Temperature, Over Voltage
- Current - Output (Max) :
- 2.5A
- Output Type :
- N-Channel
- Interface :
- On/Off
- Mounting Type :
- Surface Mount
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Features :
- Auto Restart, Status Flag
- Voltage - Load :
- 5.5V ~ 36V
- Ratio - Input:Output :
- 1:1
- Product Status :
- Active
- Number of Outputs :
- 1
- Rds On (Typ) :
- 60mOhm
- Datasheets
- VN751STR
N-Channel PMIC VN751 8 Pin 24V 8-SOIC (0.154, 3.90mm Width)
VN751STR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart, Status Flag features.It comes under the family of VN751.A total of 8 terminations have been recorded.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 2.5A.High efficiency is possible when the supply voltage is set to 24V.Surface Mount is mounted in the way.8 pins are connected to it in total.As a result, the output current is set to 2.5A.It is recommended to set the supply voltage to 24V for optimum efficiency.It has a maximum current requirement of 1.8mA.There are 1 drivers available for this part.
VN751STR Features
Supplied from 24V
VN751STR Applications
There are a lot of STMicroelectronics
VN751STR Power Switches ICs applications.
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
