UC3823N
Or copy the link below:
- Mfr.Part #
- UC3823N
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 16DIP
- Stock
- 54
- In Stock ：
- 54
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Operating Temperature :
- 0°C ~ 70°C (TA)
- Output Type :
- Transistor Driver
- Mounting Type :
- Through Hole
- Topology :
- Buck, Boost, Flyback, Forward Converter
- Frequency - Switching :
- 340kHz ~ 460kHz
- Duty Cycle (Max) :
- 85%
- Output Phases :
- 1
- Number of Outputs :
- 1
- Function :
- Step-Up, Step-Down, Step-Up/Step-Down
- Synchronous Rectifier :
- No
- Clock Sync :
- No
- Serial Interfaces :
- -
- Control Features :
- Current Limit, Enable, Frequency Control, Ramp, Soft Start
- Supplier Device Package :
- 16-PDIP
- Voltage - Supply (Vcc/Vdd) :
- 8.4V ~ 30V
- Output Configuration :
- Positive
- Product Status :
- Active
- Datasheets
- UC3823N
16 Terminals 8.4V~30V 16-Pin UC3823 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 340kHz~460kHz Transistor Driver
UC3823N Overview
With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.4V~30V and has a 8.4V~30V supply voltage. Worked in a 0°C~70°C TA dc switcher before. In this switching controller, the switch can be set to 340kHz~460kHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "UC3823" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 13V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 85 %. Switching controllers work at 1MHz Hz. This value is CAN ALSO BE CONFIGURED IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose. DC switching uses 1.1mA when it is dormant. There is a requirement for a 15V supply voltage. It is not recommended to supply more current to the controller than 33mA.
UC3823N Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC3823N Applications
There are a lot of Texas Instruments
UC3823N DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
