UC2525ANG4
Or copy the link below:
- Mfr.Part #
- UC2525ANG4
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC REG CTRLR MULT TOPOLOGY 16DIP
- Stock
- 48,765
- In Stock ：
- 48,765
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Number of Outputs :
- 2
- Voltage - Supply (Vcc/Vdd) :
- 8V ~ 35V
- Output Configuration :
- Positive
- Function :
- Step-Up, Step-Up/Step-Down
- Output Phases :
- 1
- Serial Interfaces :
- -
- Product Status :
- Discontinued at Digi-Key
- Output Type :
- Transistor Driver
- Topology :
- Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
- Clock Sync :
- Yes
- Duty Cycle (Max) :
- 49%
- Mounting Type :
- Through Hole
- Supplier Device Package :
- 16-PDIP
- Control Features :
- Enable, Frequency Control, Soft Start
- Frequency - Switching :
- 100Hz ~ 400kHz
- Operating Temperature :
- -25°C ~ 85°C (TA)
- Synchronous Rectifier :
- Yes
- Datasheets
- UC2525ANG4
16 Terminals 8V~35V 16-Pin UC2525 DC to DC converter IC SWITCHING CONTROLLER 2 Outputs 100Hz~400kHz Transistor Driver
UC2525ANG4 Overview
This switching controller fits most application requirements since it is packaged in a 16-DIP (0.300, 7.62mm) package. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 8V~35V is the operating voltage and supply voltage of the dc control. Suitable for a -25°C~85°C TA dc switcher. There is a switch at 100Hz~400kHz that can be used with this controller. dc dc regulator is made easier with Through Hole. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 20V. You can find other relevant dc to dc converter ics by searching "UC2525". There are only 16 pins on switching converter. DC regulator outputs 5.15V voltage according to the test statistics. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 500kHz frequencies. It is possible to set the input voltage to 35V for nominal working status. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 35V. Output current will not exceed 500mA.
UC2525ANG4 Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC2525ANG4 Applications
There are a lot of Texas Instruments
UC2525ANG4 DC to DC converter applications.
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
