UAF42AP

UAF42AP Overview

This product comes in the form of a 14-DIP (0.300, 7.62mm) package.As far as packaging is concerned, it comes in a Tube package.There is a type of mounting that is Through Hole for the gadget.There is a Universal, Continuous-Time filter type assigned to this part.Power sources of ±6V~18V should work.A total of 19 14 pins are located on this board.Among all the components inside the device, the UAF42 is by far the most important.There is either a cutoff or a center frequency in the device when it is operating at 100kHz frequency.In order to power the component at all times, a source of 15V must be present at all times.There are two figures referred to as 3 and A.In order for it to work properly, it should be warmer than -25°C.The maximum working temperature is currently set at 85°C.In this case, 14 will remain the pin number of the component.A 4 circuit is one of these circuits.With a maximum supply temperature of 7mA, it is capable of handling a wide range of ambient temperatures.One is included as part of the Through Hole mount package, which is included in the price.To make it function properly, it must be supplied with a voltage of 18V in order to function properly.To operate this device, it requires a supply voltage of 6V to operate.

UAF42AP Features

Supply voltage of 15V
Maximum operating temperature of 85°C
4 circuits
Mount of Through Hole

UAF42AP Applications

There are a lot of Texas Instruments
UAF42AP active filters applications.

• Complex Multiply-Add
• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng
• Very Narrow Band Fllters