TPS2100DBVT
Or copy the link below:
- Mfr.Part #
- TPS2100DBVT
- Manufacturer
- Texas Instruments
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OR CTRLR SRC SELECT SOT23-5
- Stock
- 450
- In Stock ：
- 450
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- OR Controllers, Ideal Diodes
- Applications :
- Handheld/Mobile Devices
- Type :
- Source Selector Switch
- Product Status :
- Active
- Ratio - Input:Output :
- 2:1
- Delay Time - ON :
- -
- Current - Output (Max) :
- 500mA, 10mA
- Supplier Device Package :
- SOT-23-5
- Voltage - Supply :
- 2.7V ~ 4V
- Internal Switch(s) :
- Yes
- FET Type :
- N and P-Channel
- Mounting Type :
- Surface Mount
- Current - Supply :
- 10 µA
- Delay Time - OFF :
- -
- Operating Temperature :
- -40°C ~ 70°C
- Package / Case :
- SC-74A, SOT-753
- Datasheets
- TPS2100DBVT
PMIC TPS2100 5 Pin 3.3V SC-74A, SOT-753
TPS2100DBVT Overview
There is a SC-74A, SOT-753 case that comes with it. In this case, it is suitable to pack the part in a Tape & Reel (TR) case. In this case, the part is mounted in the direction of Surface Mount. The voltage that is applied to the circuit is 2.7V~4V. There must not be a minimum operating temperature of -40°C~70°C for this component. The component connected to Handheld/Mobile Devices is a good match for this component. As far as the device classification is concerned, it falls under the Source Selector Switch category. In this case, the FET type can be recognized as N and P-Channel. 5 terminations are available in the part in order to meet your needs. There are 5 pins on the board and it is designed with them. A part based on TPS2100 is used in this part. Powered by 3.3V, it is capable of delivering its performance to its customers. For the purpose of running 260, this part's peak reflow temperature is utilized. It is important to note that the part has 5 pins. A maximum supply voltage is achieved as soon as Vsup reaches 4V, which means it is at its maximum level. A supply current of 10μA is used to operate the device when it is in operation. There are outputs that can be connected to 1. In order to mount the part properly, it is recommended to mount it by Surface Mount. It is possible for the chip to function when the output current conducts under the 500mA 10mA axis. It is possible to use this chip with an input voltage that exceeds 4V volts. There are only a few chips on the market that can be used with an input voltage lower than 2.7V volts. It is possible to deliver the part under a 10mA output current. 500mA is the output current that can be delivered to the component in terms of its output voltage. The device can be operated with a voltage supply of 4V on the supply line. This part has a 2 input that allows it to run. In order for the device resistance to stay within the range of 375mOhm, it needs to be calibrated.
TPS2100DBVT Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2100DBVT Applications
There are a lot of Texas Instruments
TPS2100DBVT Ideal Diode controller applications.
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive battery protection
- ADAS domain controller
- Camera ECU
- Head Unit
- USB HUBs
- Active ORing for redundant power
- Factory automation and control - PLC digital output modules
- Industrial motor drives
- Industrial transport
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
