TLC7135CDWRG4

TLC7135CDWRG4 Overview

The package follows the same design pattern as Tape & Reel (TR).There is a version 28-SOIC (0.295, 7.50mm Width) of the package that includes it as part of it.The type of display used in this electrical device is LED, LCD.This electronic component is mounted on the board using the Surface Mount axis.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.As long as you use a 4V~6VV power source, it should work.Transmission lines are terminated with 28 terminations using devices whose characteristic impedance matches that of the transmission line.One of the members of the TLC7135 family of devices is this device.There are a total of 21 28 pins on the device.As a matter of fact, it has 28 pins installed.There is a voltage of 5V applied to the supply voltage of this device.To ensure that 1mA plays its full role, the supply current must be provided so that the function of 1mA can be accomplished.To ensure high efficiency, the supply voltage should be maintained at 5.25V.Due to its two +-5V power supplies, it can run anywhere in the world.ADC, DUAL-SLOPE converters are based on the voltage at the input and output of the source in order to convert the voltage.A 1 analog In channel is a channel in the electromagnetic spectrum that represents a bandwidth.This electronic part was designed using 14 Bits as a design tool.

TLC7135CDWRG4 Features

28-SOIC (0.295, 7.50mm Width) package
TLC7135 family
28 pin count
28 pins
+-5V power supplies
ADC, DUAL-SLOPE converters

TLC7135CDWRG4 Applications

There are a lot of Texas Instruments
TLC7135CDWRG4 display drivers applications.

• Relay Driver
• Digital Clock, Thermometer, Counter, Voltmeter
• Instrumentation Readouts
• Instrumentation
• Test Equipment
• Hand Held Instruments
• Bargraph Dlsplays
• Numerlc and Non-Numerlc Panel Dlsplays
• High and Low Temperature Envlronment s where LCD
• Dlsplay Integrtty ls Compromissd