TL082ID
Or copy the link below:
- Mfr.Part #
- TL082ID
- Manufacturer
- STMicroelectronics
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 2 CIRCUIT 8SOIC
- Stock
- 956
- In Stock ：
- 956
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Input Bias :
- 20 pA
- Amplifier Type :
- J-FET
- Product Status :
- Active
- Voltage - Supply Span (Min) :
- 6 V
- Mounting Type :
- Surface Mount
- Output Type :
- -
- Gain Bandwidth Product :
- 4 MHz
- Voltage - Supply Span (Max) :
- 36 V
- -3db Bandwidth :
- -
- Number of Circuits :
- 2
- Current - Output / Channel :
- 40 mA
- Operating Temperature :
- -40°C ~ 105°C
- Voltage - Input Offset :
- 3 mV
- Supplier Device Package :
- 8-SOIC
- Slew Rate :
- 16V/µs
- Current - Supply :
- 1.4mA
- Datasheets
- TL082ID
30pA 75 dB Instrumentational OP Amps 18V 7V~36V ±3.5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)
TL082IDG4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 6mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 1.4mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 106.02dB for the time being. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V.
TL082IDG4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082IDG4 Applications
There are a lot of Texas Instruments
TL082IDG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
