TL081CDR
Or copy the link below:
- Mfr.Part #
- TL081CDR
- Manufacturer
- Texas Instruments
- Package / Case
- Datasheet
- Download
- Description
- IC OPAMP JFET 1 CIRCUIT 8SOIC
- Stock
- 41,816
- In Stock ：
- 41,816
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Temperature :
- 0°C ~ 70°C
- Mounting Type :
- Surface Mount
- -3db Bandwidth :
- -
- Current - Supply :
- 1.4mA
- Voltage - Supply Span (Max) :
- 36 V
- Number of Circuits :
- 1
- Output Type :
- -
- Slew Rate :
- 13V/µs
- Amplifier Type :
- J-FET
- Voltage - Input Offset :
- 3 mV
- Current - Input Bias :
- 30 pA
- Voltage - Supply Span (Min) :
- 7 V
- Gain Bandwidth Product :
- 3 MHz
- Supplier Device Package :
- 8-SOIC
- Product Status :
- Active
- Current - Output / Channel :
- -
- Datasheets
- TL081CDR
1 Channels 30pA 70 dB Instrumentational OP Amps 7V~36V ±3.5V~18V TL081 8 Pins 8-SOIC (0.154, 3.90mm Width)
TL081CDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 15mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Maintain 106.02dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As a result of this, the buffer amplifier is packed in TR.
TL081CDR Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL081CDR Applications
There are a lot of Texas Instruments
TL081CDR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to VESS Electronics. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
